ISL45042_14 Datasheet, PDF (3/9 Pages) Intersil Corporation – LCD Module Calibrator

ISL45042
Absolute Maximum Ratings
V_DD to GND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+4V
Input Voltages to GND
SET, CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +4V
AVDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +20V
CTL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +17V
Output Voltages to GND
OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +20V
ESD Rating
Human Body Model
Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.75kV
CTL to GND (No EEPROM Content Disruption). . . . . . . . . .7kV
Thermal Information
Thermal Resistance (Typical, Notes 4, 5) θ_JA (°C/W) θ_JC (°C/W)
8 Ld TDFN Package. . . . . . . . . . . . . . .
47
12
Moisture Sensitivity (see Technical Brief TB363)
All Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Level 1
Maximum Junction Temperature (Plastic Package) . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Erase/Write Cycles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10,000
Data Retention. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 years @ +85°C
Operating Conditions
Temperature Range
ISL45042IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTE:
4. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
5. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications
PARAMETER
Test Conditions: V_DD = 3V, AV_DD = 18V, R_SET = 5kΩ, R1 = 10kΩ, R2 = 10kΩ; Unless Otherwise Specified.
Typicals are at T_A = +25°C
SYMBOL
TEST CONDITIONS
TEMP
(°C)
MIN
MAX
(Note 13) TYP (Note 13) UNITS
DC CHARACTERISTICS
V_DD Supply Range
V_DD
Range Allowing Programming
0 to 85
3
Operation without Programming
Full
2.6
-
3.6
V
-
3.6
V
V_DD Supply Current
I_DD
CE = V_DD (Note 10)
CE = GND
Full
-
-
65
µA
Full
-
-
65
µA
AVDD Supply Range
AVDD
Range Allowing Programming
Full
10.8
-
20
V
Operation without Programming
Full
4.5
20
V
AV_DD Supply Current (Note 7)
CTL High Voltage
CTL Low Voltage
CTL High Rejected Pulse Width
CTL Low Rejected Pulse Width
CTL High Minimum Pulse Width
CTL Low Minimum Pulse Width
CTL Minimum Time Between
Counts
I_AVDD
CTL_IH
CTL_IL
CTL_IHRPW
CTL_ILRPW
CTL_IHMPW
CTL_ILMPW
CTL_MTC
2.6V < V_DD < 3.6V
2.6V < V_DD < 3.6V
Full
38
µA
Full
0.7*V_DD
- 0.8*V_DD V
Full
0.2*V_DD
- 0.3*V_DD V
Full
20
-
-
µs
Full
20
-
-
µs
Full
-
-
200
µs
Full
-
-
200
µs
Full
-
-
10
µs
CTL Input Current
ICTL
CTL = GND
Full
-
-
10
µA
CTL Input Capacitance
CE Input Low Voltage
CE Input High Voltage
CE Minimum Start-Up Time
CTL_CAP
CE_IL
CE_IH
CE_ST
CTL = V_DD
(Note 9)
2.6V < V_DD < 3.6V
2.6V < V_DD < 3.6V
(Note 9)
Full
-
-
10
µA
Full
-
10
-
pF
Full
-
-
0.4
V
Full
0.7*V_DD
-
-
V
Full
-
1
-
ms
3
FN6072.9
April 13, 2011