English
Language : 

ISL45042 Datasheet, PDF (3/8 Pages) Intersil Corporation – LCD Module Calibrator
◁
ISL45042
Absolute Maximum Ratings
VDD to GND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+4V
Input Voltages to GND
SET, CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +4V
AVDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +20V
CTL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +17V
Output Voltages to GND
OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +20V
ESD Rating
Human Body Model
Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.75kV
CTL to GND (No EEPROM Content Disruption . . . . . . . . . .8kV
Thermal Information
Thermal Resistance (Typical, Notes 1, 2) θJA (°C/W) θJC (°C/W)
8 Ld TDFN Package. . . . . . . . . . . . . . .
47
12
Moisture Sensitivity (see Technical Brief TB363)
All Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Level 1
Maximum Junction Temperature (Plastic Package) . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Erase/Write Cycles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10,000
Data Retention. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 years @ +85°C
Operating Conditions
Temperature Range
ISL45042IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTE:
1. θJA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
2. For θJC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications
PARAMETER
Test Conditions: VDD = 3V, AVDD = 10V, OUT = 5V, RSET = 24.9kΩ; Unless Otherwise Specified.
Typicals are at TA = +25°C
SYMBOL
TEST CONDITIONS
TEMP
(°C)
MIN
(Note 9)
MAX
TYP (Note 9) UNITS
DC CHARACTERISTICS
VDD Supply Range
VDD
For Programming
For Operation
0 to 85
3
Full
2.6
-
3.6
V
-
3.6
V
VDD Supply Current
IDD
CE = VDD (Note 7)
CE = GND
Full
-
Full
-
-
50
µA
-
20
µA
AVDD Supply Range
AVDD
Full
4.5
-
20
V
AVDD Supply Current
IAVDD
(Note 4)
Full
-
-
20
µA
CTL High Voltage
CTL Low Voltage
CTL High Rejected Pulse Width
CTL Low Rejected Pulse Width
CTL High Minimum Pulse Width
CTL Low Minimum Pulse Width
CTL Minimum Time Between
Counts
CTLIH
CTLIL
CTLIHRPW
CTLILRPW
CTLIHMPW
CTLILMPW
CTLMTC
2.6V < VDD < 3.6V
2.6V < VDD < 3.6V
Full
0.7*VDD
Full
0.2*VDD
Full
20
Full
20
Full
-
Full
-
Full
-
-
0.8*VDD V
-
0.3*VDD V
-
-
µs
-
-
µs
-
200
µs
-
200
µs
-
10
µs
CTL Input Current
ICTL
CTL = GND
Full
-
-
10
µA
CTL Input Capacitance
CE Input Low Voltage
CE Input High Voltage
CE Minimum Start-Up Time
CTL EEPROM Program Voltage
CTLCAP
CEIL
CEIH
CEST
CTLPROM
CTL = VDD
(Note 6)
2.6V < VDD < 3.6V
2.6V < VDD < 3.6V
(Note 6)
2.6V < VDD < 3.6V, (Note 3)
Full
-
-
10
µA
Full
-
10
-
pF
Full
-
-
0.4
V
Full
0.64*VDD
-
Full
-
1
-
V
-
ms
Full
4.9
-
15.75 V
3
FN6072.8
July 9, 2008
 ▷