ISL43240_14 Datasheet, PDF (3/15 Pages) Intersil Corporation – Low-Voltage, Single and Dual Supply, Quad SPDT, High Performance Analog Switch

ISL43240
Absolute Maximum Ratings
V+ to V-. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to15V
V+ to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to15V
V- to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -15 to 0.3V
All Other Pins (Note 5) . . . . . . . . . . . . . . . . . . . . .((V-) - 0.3V) to ((V+) + 0.3V)
Continuous Current (Any Terminal) . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA
Peak Current, IN, NO, NC, or COM
(Pulsed 1ms, 10% Duty Cycle, Max) . . . . . . . . . . . . . . . . . . . . . . . . 100mA
ESD Rating (Per MIL-STD-883 Method 3015) . . . . . . . . . . . . . . . . . . . . >2kV
Operating Conditions
Temperature Range
ISL43240IX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to 85°C
Thermal Information
Thermal Resistance (Typical)
_JA (°C/W)
20 Ld SSOP Package (Note 6) . . . . . . . . . . . . . . . . . . . .
150
20 Ld QFN Package (Note 7). . . . . . . . . . . . . . . . . . . . . .
75
Maximum Junction Temperature (Plastic Package) . . . . . . . . . . . +150°C
Moisture Sensitivity (See TB363)
All Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Level 1
Maximum Storage Temperature Range. . . . . . . . . . . . . . . . . -65°C to +150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . +300°C
(SSOP - Lead Tips Only)
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see TB493
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
5. Signals on NC, NO, COM, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maximum current ratings.
6. _JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
7. _JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
Electrical Specifications ±5V Supply Test Conditions: V_SUPPLY = 4.5V to 5.5V, GND = 0V, V_INH = 2.4V, V_INL = 0.8V (Note 7),
Unless Otherwise Specified
PARAMETER
TEST CONDITIONS
TEMP
MIN
MAX
(°C) (Note 8) TYP (Note 8) UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, V_ANALOG
ON Resistance, r_ON
V_S = 4.5V, I_COM = 10mA, V_NO or V_NC = 3.5V,
See Figure 5
Full
V-
25
-
Full
-
-
V+
V
18
25
Ω
-
30
Ω
r_ON Matching Between Channels,
r_ON
V_S = 4.5V, I_COM = 10mA, V_NO or V_NC = 3V
25
-
0.5
2
Ω
Full
-
-
4
Ω
r_ON Flatness, R_FLAT(ON)
V_S = 4.5V, I_COM = 10mA, V_NO or V_NC = 0V, 3V, Note 10 25
-
-
5
Ω
Full
-
-
5
Ω
NO or NC OFF Leakage Current,
I_NO(OFF) or I_NC(OFF)
V_S = 5.5V, V_COM = 4.5V, V_NO or V_NC = +4.5V,
Note 9
25
-0.2
-
0.2
nA
Full
-2.5
-
2.5
nA
COM ON Leakage Current, I_COM(ON) V_S = 5.5V, V_COM = V_NO or V_NC = 4.5V, Note 9
25
-0.4
-
0.4
nA
Full
-5
-
5
nA
DIGITAL INPUT CHARACTERISTICS
Input Voltage High, V_INH
Input Voltage Low, V_INL
Input Current, I_INH, I_INL
DYNAMIC CHARACTERISTICS
V_S = 5.5V, V_IN = 0V or V+
Full
2.4
1.6
-
V
Full
-
1.5
0.8
V
Full
-1
-
1
µA
Turn-ON Time, t_ON
V_S = 4.5V, V_NO or V_NC = 3V, R_L = 300Ω, C_L = 35pF,
25
-
V_IN = 0 to 3V, See Figure 1
Full
-
52
65
ns
-
75
ns
Turn-OFF Time, t_OFF
V_S = 4.5V, V_NO or V_NC = 3V, R_L = 300Ω, C_L = 35pF,
25
-
V_IN = 0 to 3V, See Figure 1
Full
-
40
50
ns
-
55
ns
Break-before-make Time Delay, t_D V_S = 5.5V, V_NO or V_NC = 3V, R_L = 300Ω, C_L = 35pF,
Full
10
19
V_IN = 0 to 3V, See Figure 3
Charge Injection, Q
C_L = 1.0nF, V_G = 0V, R_G = 0Ω, See Figure 2
25
-
-
NO OFF Capacitance, C_OFF
f = 1MHz, V_NO or V_NC = V_COM = 0V, See Figure 7
25
-
10
NC OFF Capacitance, C_OFF
f = 1MHz, V_NO or V_NC = V_COM = 0V, See Figure 7
25
-
10
COM ON Capacitance, C_COM(ON)
f = 1MHz, V_NO or V_NC = V_COM = 0V, See Figure 7
25
-
30
OFF Isolation
Crosstalk, Note 11
R_L = 50Ω, C_L = 15pF, f = 1MHz,
V_NO or V_NC = 1V_RMS, See Figures 4 and 6
25
-
71
25
-
-92
-
ns
5
pC
-
pF
-
pF
-
pF
-
dB
-
dB
Power Supply Rejection Ratio
R_L = 50Ω, C_L = 5pF, f = 1MHz
25
-
59
-
dB
Submit Document Feedback
3
FN6036.3
December 15, 2014