ISL29028IROZ Datasheet, PDF (3/16 Pages) Intersil Corporation – Low Power Ambient Light and Proximity Sensor with Intelligent Interrupt and Sleep Modes

ISL29028
Absolute Maximum Ratings (T_A = +25°C)
VI_{2DCDBSuuspPpilny}
Voltage
Voltage
between V_DD and GND
(SCL, SDA) . . . . . . . .
.
.
.
.
.
.
.....
-0.5V
. .4.0V
to 4.0V
I²C Bus Pin Current (SCL, SDA) . . . . . . . . . . . . . . . . <10mA
R_EXT Pin Voltage . . . . . . . . . . . . . . . . -0.5V to VDD + 0.5V
IRDR Pin Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.5V
ADDR0 Pin Voltage . . . . . . . . . . . . . . . -0.5V to VDD + 0.5V
INT Pin Voltage . . . . . . . . . . . . . . . . . . . . . . -0.5V to 4.0V
INT Pin Current . . . . . . . . . . . . . . . . . . . . . . . . . . . <10mA
ESD Rating
Human Body Model (Note 5) . . . . . . . . . . . . . . . . . . . 2kV
Thermal Information
Thermal Resistance (Typical, Note 4)
θ_JA (°C/W)
8 Ld ODFN. . . . . . . . . . . . . . . . . . . . . . . . .
88
Maximum Die Temperature . . . . . . . . . . . . . . . . . . . +90°C
Storage Temperature . . . . . . . . . . . . . . . . -40°C to +100°C
Operating Temperature . . . . . . . . . . . . . . . -40°C to +85°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact
product reliability and result in failures not covered by warranty.
NOTES:
4. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach”
features. See Tech Brief TB379.
5. ESD on all pins is 2kV except for IRDR, which is 1.5kV.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless
otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: T_J = T_C = T_A
Electrical Specifications V_DD = 3.0V, T_A = +25°C, R_EXT = 499kΩ 1% tolerance.
PARAMETER
DESCRIPTION
CONDITION
MIN TYP MAX UNIT
V_DD
Power Supply Range
SR_V_DD Input Power-up Slew Rate
I_{DD_OFF} Supply Current when Powered Down
I_{DD_NORM} Supply Current for ALS+Prox in Sleep Time
I_{DD_PRX_SLP} Supply Current for Prox in Sleep Time
I_{DD_ALS} Supply Current for ALS
f_OSC
Internal Oscillator Frequency
t_{INTGR_ALS} 12-bit ALS Integration/Conversion Time
t_{INTGR_PROX} 8-bit Prox Integration/Conversion Time
DATA_{ALS_0} ALS Result when Dark
DATA_{ALS_F} Full Scale ALS ADC Code
2.25 3.0 3.63 V
V_DD Rising Edge between 0.4V and 2.25V 0.5
V/ms
ALS_EN = 0; PROX_EN = 0
0.1 0.8 µA
ALS_EN = 1; PROX_EN = 1
110 125 µA
ALS_EN = 0; PROX_EN = 1
80
µA
ALS_EN = 1; PROX_EN = 0
96
µA
5.25
MHz
88 100 112 ms
0.54
ms
E_AMBIENT = 0 lux, 2k Range
E_AMBIENT > Selected Range Maximum Lux
(Note 9)
1
Counts
4095 Counts
ΔDATA
DATA
Count Output Variation Over Three Light
Sources: Fluorescent, Incandescent and
Sunlight
Ambient Light Sensing
±10
%
DATA_{ALS_1} Light Count Output with LSB of
0.0326 lux/count
E = 53 lux, Fluorescent (Notes 6, 9),
ALS_RANGE = 0
1638
Counts
DATA_{ALS_2} Light Count Output With LSB of
0.522 lux/count
E = 320 lux, Fluorescent (Note 6),
ALS_RANGE = 1
460 614 768 Counts
DATA_{PROX_0} Prox Measurement w/o Object in Path
DATA_{PROX_F} Full Scale Prox ADC Code
DATA_{PROX_1} Prox Measurement Result
t_r
Rise Time for IRDR Sink Current
t_f
Fall time for IRDR Sink Current
I_{IRDR_0} IRDR Sink Current
I_{IRDR_1} IRDR Sink Current
(Note 7)
R_LOAD = 15Ω at IRDR pin, 20% to 80%
R_LOAD = 15Ω at IRDR pin, 80% to 20%
PROX_DR = 0; V_IRDR = 0.5V
PROX_DR = 1; V_IRDR = 0.5V
1
Counts
255 Counts
36 46 56 Counts
500
ns
500
ns
95 110 125 mA
220
mA
3
FN6780.2
November 4, 2011