English
Language : 

ISL28118M Datasheet, PDF (3/22 Pages) Intersil Corporation – 40V Extended Temperature Range, Precision Single-Supply, Rail-to-Rail Output
ISL28118M
Absolute Maximum Ratings
Maximum Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42V
Maximum Differential Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Maximum Differential Input Voltage . . . . . . . .42V or V- - 0.5V to V+ + 0.5V
Min/Max Input Voltage . . . . . . . . . . . . . . . . . . .42V or V- - 0.5V to V+ + 0.5V
Max/Min Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20mA
Output Short-Circuit Duration (1 output at a time) . . . . . . . . . . . . . . Indefinite
ESD Tolerance
Human Body Model (Tested per JESD22-A114F) . . . . . . . . . . . . . . . . 3kV
Machine Model (Tested per JESD22-A115-A) . . . . . . . . . . . . . . . . . . 300V
Charged Device Model (Tested per CDM-22CI0ID) . . . . . . . . . . . . . . . 2kV
Thermal Information
Thermal Resistance (Typical)
θJA (°C/W) θJC (°C/W)
8 Ld MSOP Package (Notes 4, 5) . . . . . . . . . 165
57
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Ambient Operating Temperature Range . . . . . . . . . . . . . .-55°C to +125°C
Maximum Operating Junction Temperature . . . . . . . . . . . . . . . . . .+150°C
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . 3V (+1.8V/-1.2V) to 40V (±20V)
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
5. For θJC, the “case temp” location is taken at the package top center.
Electrical Specifications VS ±15V, VCM = 0, VO = 0V, RL = Open, TA= +25°C, unless otherwise noted. Boldface limits apply over the
operating temperature range, -55°C to +125°C. Temperature data established by characterization.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
MAX
(Note 6) TYP (Note 6) UNIT
VOS
Input Offset Voltage
-150
25
150
µV
-270
270
µV
TCVOS
IB
Input Offset Voltage Temperature Coefficient
Input Bias Current
-1.2
-575
-800
0.2
-230
1.2 µV/°C
nA
nA
TCIB
Input Bias Current
Temperature Coefficient
-0.8
nA/°C
IOS
Input Offset Current
-50
4
50
nA
-75
75
nA
CMRR
Common-Mode Rejection Ratio
VCM = V- - 0.5V to V+ - 1.8V
VCM = V- to V+ -1.8V
118
dB
102 118
dB
97
dB
VCMIR
PSRR
Common Mode Input Voltage Range
Power Supply Rejection Ratio
Guaranteed by CMRR test
V- - 0.5
V+ - 1.8 V
V-
V+ - 1.8 V
VS = 3V to 40V, VCMIR = Valid Input Voltage
109 124
dB
105
dB
AVOL
Open-Loop Gain
VO = -13V to +13V, RL = 10kΩ to ground
120 136
dB
114
dB
VOL
Output Voltage Low,
VOUT to V-
RL = 10kΩ
70
mV
85
mV
VOH
Output Voltage High,
V+ to VOUT
RL = 10kΩ
110 mV
120 mV
IS
Supply Current/Amplifier
RL = Open
0.85 1.2
mA
1.6
mA
ISC+
Output Short Circuit Source Current
RL = 10Ω to V-
16
mA
3
FN7858.0
May 11, 2011