HCS86MS Datasheet, PDF (3/8 Pages) Intersil Corporation – Radiation Hardened Quad 2-Input Exclusive OR Gate

Specifications HCS86MS
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETER
Data to Input
SYMBOL
TPHL
(NOTES 1, 2)
CONDITIONS
VCC = 4.5V
Data to Input
TPLH VCC = 4.5V
GROUP
A SUB-
GROUPS
9
10, 11
9
10, 11
TEMPERATURE
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
NOTES:
1. All voltages referenced to device GND.
2. AC measurements assume RL = 500Ω, CL = 50pF, Input TR = TF = 3ns, VIL = GND, VIH = VCC.
LIMITS
MIN MAX UNITS
2
18
ns
2
20
ns
2
20
ns
2
22
ns
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS
LIMITS
PARAMETER
Capacitance Power
Dissipation
SYMBOL
CPD
CONDITIONS
VCC = 5.0V, f = 1MHz
Input Capacitance
CIN
VCC = 5.0V, f = 1MHz
Output Transition
Time
TTHL
TTLH
VCC = 4.5V
NOTES
1
1
1
1
1
1
TEMPERATURE
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
MIN MAX UNITS
-
33
pF
-
54
pF
-
10
pF
-
10
pF
-
15
ns
-
22
ns
NOTE:
1. The parameters listed in Table 3 are controlled via design or process parameters. Min and Max Limits are guaranteed but not directly
tested. These parameters are characterized upon initial design release and upon design changes which affect these characteristics.
TABLE 4. DC POST RADIATION ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETER
Quiescent Current
Output Current (Sink)
Output Current (Source)
Output Voltage Low
Output Voltage High
Input Leakage Current
Noise Immunity
Functional Test
Data to Output
SYMBOL
(NOTES 1, 2)
CONDITIONS
ICC
VCC = 5.5V, VIN = VCC or GND
IOL
VCC = 4.5V, VIN = VCC or GND,
VOUT = 0.4V
IOH
VCC = 4.5V, VIN = VCC or GND,
VOUT = VCC -0.4V
VOL
VCC = 4.5V and 5.5V, VIH = 0.70(VCC),
VIL = 0.30(VCC), IOL = 50µA
VOH
VCC = 4.5V and 5.5V, VIH = 0.70(VCC),
VIL = 0.30(VCC), IOH = -50µA
IIN
VCC = 5.5V, VIN = VCC or GND
FN
VCC = 4.5V, VIH = 0.70(VCC),
VIL = 0.30(VCC), (Note 3)
TPHL VCC = 4.5V
TPLH VCC = 4.5V
TEMP-
ERATURE
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
NOTES:
1. All voltages referenced to device GND.
2. AC measurements assume RL = 500Ω, CL = 50pF, Input TR = TF = 3ns, VIL = GND, VIH = VCC.
3. For functional tests, VO ≥ 4.0V is recognized as a logic “1”, and VO ≤ 0.5V is recognized as a logic “0”.
200K RAD
LIMITS
MIN MAX
-
0.2
4.0
-
-4.0
-
-
0.1
VCC
-
-0.1
-
±5
-
-
2
20
2
22
UNITS
mA
mA
mA
V
V
µA
-
ns
ns
Spec Number 518773
95