HCS154MS_11 Datasheet, PDF (3/8 Pages) Intersil Corporation – Radiation Hardened 4 to 16 Line Decoder/Demultiplexer

HCS154MS
Absolute Maximum Ratings
Supply Voltage. . . . . . . . . . . . . . . . . . . . . . -0.5V to +7.0V
Input Voltage Range, All Inputs . . . . . . . -0.5V to VCC +0.5V
DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . ±10mA
DC Drain Current, Any One Output. . . . . . . . . . . . . . . . . . . . ±25mA
(All Voltage Reference to the VSS Terminal)
Storage Temperature Range (TSTG) . . . . . . -65°C to +150°C
Lead Temperature (Soldering 10sec) . . . . . . . . . . . +265°C
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . +175°C
ESD Classification. . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Reliability Information
Thermal Resistance
θ_JA
θ_JC
SBDIP Package . . . . . . . . . . . . . . 63°C/W 23°C/W
Ceramic Flatpack Package . . . . . . . 87°C/W 23°C/W
Maximum Package Power Dissipation at +125^oC Ambient
SBDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . 0.79W
Ceramic Flatpack Package . . . . . . . . . . . . . . . . . . . 0.57W
If device power exceeds package dissipation capability,
provide heat sinking or derate linearly at the following rate:
SBDIP Package . . . . . . . . . . . . . . . . . . . . . . 15.9mW/°C
Ceramic Flatpack Package . . . . . . . . . . . . . . . 11.5mW/°C
Operating Conditions
Supply Voltage . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Input Rise and Fall Times at 4.5V VCC (TR, TF) . . . . . 100ns
MaxOperating Temperature Range (T_A) . . . -55°C to +125°C
Input Low Voltage (VIL) . . . . . . . . . . . . 0.0V to 30% of VCC
Input High Voltage (VIH) . . . . . . . . . . . . 70% of VCC to VCC
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact
product reliability and result in failures not covered by warranty.
DC Electrical Specifications
SYMBOL PARAMETERS
CONDITIONS
(Note 1)
GROUP A
SUBGROUPS
TEMPERATURE
LIMITS
MIN MAX UNITS
ICC Quiescent Current VCC = 5.5V,
VIN = VCC or GND
1
2, 3
+25°C
+125°C, -55°C
- 40 µA
- 750 µA
IOL Output Current
(Sink)
VCC = 4.5V, VIH = 4.5V,
VOUT = 0.4V, VIL = 0V
1
2, 3
+25°C
+125°C, -55°C
4.8 -
mA
4.0 -
mA
IOH Output Current
(Source)
VCC = 4.5V, VIH = 4.5V,
VOUT = VCC -0.4V,
VIL = 0V
1
2, 3
+25°C
-4.8 -
mA
+125°C, -55°C
-4.0 -
mA
VOL
Output Voltage Low VCC = 4.5V, VIH = 3.15V,
IOL = 50μA, VIL = 1.35V
1, 2, 3
+25°C, +125°C, -55°C - 0.1
V
VCC = 5.5V, VIH = 3.85V,
IOL = 50μA, VIL = 1.65V
1, 2, 3
+25°C, +125°C, -55°C - 0.1
V
VOH
Output Voltage
High
VCC = 4.5V, VIH = 3.15V,
IOH = -50μA, VIL = 1.35V
1, 2, 3
+25°C, +125°C, -55°C VCC -
V
-0.1
VCC = 5.5V, VIH = 3.85V,
IOH = -50μA, VIL = 1.65V
1, 2, 3
+25°C, +125°C, -55°C VCC -
V
-0.1
IIN
Input Leakage
Current
VCC = 5.5V, VIN = VCC or
GND
1
2, 3
+25°C
+125°C, -55°C
- ±0.5 µA
- ±5.0 µA
FN
Noise Immunity VCC = 4.5V,
7, 8A, 8B
+25°C, +125°C, -55°C -
-
-
Functional Test
VIH = 0.70(VCC), (Note 2)
VIL = 0.30(VCC)
NOTES:
1. All voltages reference to device GND.
2. For functional tests, VO ≥ 4.0V is recognized as a logic “1”, and VO ≤ 0.5V is recognized as a logic “0”.
3
FN2479.3
January 6, 2011