DG401883 Datasheet, PDF (3/12 Pages) Intersil Corporation – Monolithic CMOS Analog Switches

Specifications DG401/883, DG403/883, DG405/883
Absolute Maximum Ratings
Reliability Information
V+ to V-. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44.0V
GND to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25V
V_L . . . . . . . . . . . . . . . . . . . . . . . . . . . . (GND - 0.3V) to (VC+) +0.3V
Digital Inputs (Note 1), V_S, V_D . . . . . (V-) -2V to (V+) + 2V or 30mA,
Whichever Occurs First
Continuous (Any Terminal) Current, (Note 1) . . . . . . . . . . . . . .±30mA
Peak Current, S or D (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . .±100mA
(Pulsed 1ms, 10% Duty Cycle)
Storage Temperature Range (A Suffix) . . . . . . . . . -65^oC to +125^oC
Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . . . . . +300^oC
Thermal Resistance (Max)
θ_JC
θ_JA
CERDIP Package . . . . . . . . . . . . . . . . . . 18^oC/W 75^oC/W
Operating Temperature (A Suffix) . . . . . . . . . . . . . . -55^oC to +125^oC
Junction Temperature (CerDIP) . . . . . . . . . . . . . . . . . . . . . . +175^oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20V Max
Operating Temperature Range . . . . . . . . . . . . . . . . -55^oC to +125^oC
Input Low Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8V Max
Input High Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4V Min
Input Rise and Fall Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20ns
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at V+ = +15V, V- = -15V, V_L = 5V, Unless Otherwise Specified
PARAMETERS
Drain-to-Source
ON Resistance
SYMBOL
CONDITIONS
R_DS(ON) V+ = +13.5V, V- = -13.5V,
I_S = -10mA, V_D = ±10V
Delta Drain-to-Source
ON Resistance
Source OFF Leakage Current
Delta
R_DS(ON)
I_S(OFF)
V+ = +16.5V, V- = -16.5V,
I_S = -10mA,
V_D = +5V, 0V, -5V
V+ = +16.5V, V- = -16.5V,
V_S = -15.5V, V_D = +15.5V
V+ = +16.5V, V- = -16.5V,
V_S = +15.5V, V_D = -15.5V
Drain OFF Leakage Current
I_D(OFF)
V+ = +16.5V, V- = -16.5V,
V_S = -15.5V, V_D = +15.5V
V+ = +16.5V, V- = -16.5V,
V_S = +15.5V, V_D = -15.5V
Channel ON Leakage
Current
I_D(ON) + V+ = +16.5V, V- = -16.5V,
I_S(ON) V_S = V_D = ±15.5V
Low Level Input Current
High Level Input Current
Positive Supply Current
I_IL
V_IN Under Test = 0.8V,
All Others = 2.4V
I_IH
V_IN Under Test = 2.4V,
All Others = 0.8V
I+
V+ = 16.5V, V- = -16.5V,
V_IN = 0V or 5.0V
Negative Supply Current
I-
V+ = +16.5V, V- = -16.5V,
V_IN = 0V or 5.0V
Logic Supply Current
I_L
V+ = +16.5V, V- = -16.5V,
V_IN 0V or 5V
Ground Current
I_GND
V+ = +16.5V, V- = -16.5V,
V_IN 0V or 5V
GROUP A
SUBGROUP TEMPERATURE
1
+25^oC
2, 3
+125^oC, -55^oC
1
+25^oC
2, 3
+125^oC, -55^oC
1
+25^oC
2
+125^oC
1
+25^oC
2
+125^oC
1
+25^oC
2
+125^oC
1
+25^oC
2
+125^oC
1
+25^oC
2
+125^oC
1, 2
+25^oC, +125^oC
1, 2
+25^oC, +125^oC
1
+25^oC
2, 3
+125^oC, -55^oC
1
+25^oC
2, 3
+125^oC, -55^oC
1
+25^oC
2, 3
+125^oC, -55^oC
1
+25^oC
2, 3
+125^oC, -55^oC
LIMITS
MIN
MAX
-
35
-
45
-
3
-
5
-
±0.25
-
±20
-
±0.25
-
±20
-
±0.25
-
±20
-
±0.25
-
±20
-
±0.4
-
±40
-
±1.0
-
±1.0
-
+1.0
-
+5.0
-
-1.0
-
-5.0
-
+1.0
-
+5.0
-
-1.0
-
-5.0
UNITS
Ω
Ω
Ω
Ω
nA
nA
nA
nA
nA
nA
nA
nA
nA
nA
µA
µA
µA
µA
µA
µA
µA
Spec Number 512046
4-3