 English |
|
|
|
|
|
|
|
| DG308A Datasheet, PDF (3/7 Pages) Intersil Corporation – Quad Monolithic SPST, CMOS Analog Switch | |||
| |||
| ◁ |
DG308A
Absolute Maximum Ratings
V+ to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44V
V- to Ground. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25V
Digital Inputs, VS, VD (Note 1) . . . . . . . . . . . . . . (V-) -2V to (V+) +2V
or 30mA, Whichever Comes First
Continuous Current, (Any Terminal Except S) . . . . . . . . . . . . . 30mA
Continuous Current, (S or D) . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Peak Current, S or D (Pulsed 1ms, 10% Duty Cycle Max) . . . . . 70mA
Thermal Information
Thermal Resistance (Typical, Note 2)
θJA (oC/W)
PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
90
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
115
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . .150oC
Maximum Storage Temperature Range . . . . . . . . . . . 65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC
(SOIC - Lead Tips Only)
Operating Conditions
Temperature Range
âCâ Sufï¬x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to 70oC
CAUTION: Stresses above those listed in âAbsolute Maximum Ratingsâ may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this speciï¬cation is not implied.
NOTES:
1. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
2. θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Speciï¬cations
V+ = 15V, V- = -15V, GND = 0V, TA = 25oC
PARAMETER
TEST CONDITIONS
DYNAMIC CHARACTERISTICS
Turn-ON Time, tON
Turn-OFF Time, tOFF
Charge Injection, Q
OFF Isolation, OIRR
See Figure 1
See Figure 1
CL = 1µF, RS = 0, VS = 0V
VIN = 0V, RL = 75â¦, VS = 2VP-P, f = 500kHz
(Note 5)
Source OFF Capacitance, CS(OFF)
f = 140kHz
Drain OFF Capacitance, CD(OFF)
Channel ON Capacitance,
CD(ON) + CS(ON)
DIGITAL INPUT CHARACTERISTICS
VS = 0V
VIN = 0V
VD = 0V
VIN = 0V
VS = VD = 0V
VIN = 15V
Input Current with Voltage High, IIH VIN = 15V, Full Temperature Range
Input Current with Voltage Low, IIL
VIN = 0V, Full Temperature Range
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VANALOG
Drain-Source ON Resistance, rDS(ON) VIN = 11V
Source OFF Leakage Current, IS(OFF) VIN = 3.5V
Drain OFF Leakage Current, ID(OFF)
Channel ON Leakage Current, ID(ON) VIN = 11V
IS = -1mA, VD = +10V
IS = 1mA, VD = -10V
VS = 14V, VD = -14V
VS = -14V, VD = 14V
VS = -14V, VD = 14V
VS = 14V, VD = -14V
VD = VS = 14V
VD = VS = -14V
(NOTE 4) (NOTE 3) (NOTE 4)
MIN
TYP
MAX
UNITS
-
130
200
ns
-
90
150
ns
-
-10
-
pC
-
78
-
dB
-
11
-
pF
-
8
-
pF
-
27
-
pF
-
0.001
1
µA
-1
-0.001
-
µA
-15
-
15
V
-
60
100
â¦
-
60
100
â¦
-
0.1
5
nA
-5
-0.1
-
nA
-
0.1
5
nA
-5
-0.1
-
nA
-
0.1
5
nA
-5
-0.1
-
nA
3
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese