English
Language : 

DG300A_01 Datasheet, PDF (3/7 Pages) Intersil Corporation – TTL-Compatible, CMOS Analog Switches
DG300A, DG301A, DG303A
Absolute Maximum Ratings
V+ to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44.0V
V- to GND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25V
Digital Inputs, VS, VD (Note 1). . . . . . . . . . . . . (V-) - 2V to (V+) + 2V
or 30mA, Whichever Occurs First
Continuous Current, (Any Terminal). . . . . . . . . . . . . . . . . . . . . 30mA
Peak Current, S or D (Pulsed 1ms, 10% Duty Cycle Max) . . 100mA
Operating Conditions
Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15V
Temperature Range
“A” Suffix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC
“B” Suffix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25oC to 85oC
“C” Suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to 70oC
Input Low Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8V (Max)
Input High Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0V (Min)
Input Rise and Fall Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤20ns
Thermal Information
Thermal Resistance (Typical, Note 2)
θJA (oC/W) θJC (oC/W)
SOIC Package . . . . . . . . . . . . . . . . . . . 100
N/A
PDIP Package . . . . . . . . . . . . . . . . . . . 100
N/A
CERDIP Package. . . . . . . . . . . . . . . . .
75
20
Maximum Junction Temperature
Hermetic Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175oC
Plastic Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150oC
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering, 10s). . . . . . . . . . . . 300oC
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. Signals on SX, DX or INX exceeding V+ or V- will be clamped by internal diodes. Limit diode forward current to maximum current ratings.
2. θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications V+ = +15V, V- = -15V, GND = 0V, TA = 25oC
“A” SUFFIX
PARAMETER
TEST CONDITIONS
(NOTE 3)
MIN
TYP
MAX
DYNAMIC CHARACTERISTICS
Turn-ON Time, tON
See Figure 3
-
Turn-OFF Time, tOFF
See Figure 3
-
Break-Before-Make
Interval, tD
See Figure 2, DG301A/DG303A
-
Charge Injection, Q
CL = 10nF, RS = 0, VS = 0
-
OFF Isolation (Note 4)
VIN = 0, RL = 1kΩ, VS = 1VRMS,
-
f = 500kHz
Crosstalk
-
(Channel-to-Channel)
150
300
130
250
50
-
3
-
62
-
-74
-
Source OFF Capacitance,
CS(OFF)
Drain OFF Capacitance,
CD(OFF)
Channel ON Capacitance,
CD(ON) + CS(ON)
Input Capacitance, CIN
f = 1MHz,
VIN = 0.8V or
VIN = 4.0V
f = 1MHz
DIGITAL INPUT CHARACTERISTICS
VS = 0
VD = 0
VS = VD = 0
VIN = 0
VIN = 15V
-
14
-
-
14
-
-
40
-
-
6
-
-
7
-
Input Current with Voltage
High, IIH
Input Current with Voltage
Low, IIL
VIN = 5.0V
VIN = 15.0V
VIN = 0V
-1
-0.001
-
-
0.001
1
-1
-0.001
-
“B” AND “C” SUFFIX
(NOTE 3)
MIN
TYP
MAX
UNITS
-
150
-
ns
-
130
-
ns
-
50
-
ns
-
3
-
mV
-
62
-
dB
-
-74
-
dB
-
14
-
pF
-
14
-
pF
-
40
-
pF
-
6
-
pF
-
7
-
pF
-1
-0.001
-
µA
-
0.001
1
µA
-1
-0.001
-
µA
3