ISL28117_1110 Datasheet, PDF (25/33 Pages) Intersil Corporation – 40V Precision Low Power Operational Amplifiers

ISL28117, ISL28217, ISL28417
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make
sure you have the latest Rev.
DATE
REVISION
CHANGE
10/11/11
FN6632.8
Figure 27 added “Positive” to Short Circuit Current title
Figure 28 added “Negative” to Short Circuit Current title
Figure 36 y axis label units changed from (nV/ÖHz) to (nV/√Hz)
Figure 37 y axis label units changed from pA/Öhz to pA/√Hz
Figure 31, 33 changed from VOUT vs Temperature to VOH vs Temperature
Figure 32, 34 changed from VOUT vs Temperature to VOL vs Temparature
Table of Contents on page 5 updated to list all package outline drawings
Changed POD M14.15 to MDP0027
Changed TCIos for ISL28417 SOIC grade B and C on pages 7 and 9 from ±3.5pA/C to ±4.0pA/C
10/7/11
1. Pg 2 Ordering Information:
a.Added ordering information rows for ISL28417FBBZ (B grade) and ISL28417FBZ (C grade).
b. Add Table of Contents
2. Pg 5 Abs Max and Thermal Information Tables:
a. Added HBM, MM, and CDM ESD levels for the ‘417
b. Added θ_JA and θ_JC values for the 14 Ld SOIC
3. Pg 6 ±15V electrical Specs
a. Added ISL28417 B & C grade VOS and limits
b. Added ISL28417 B & C grade TCVOS and limits
c. Added ISL28417 B & C grade TCIOS and limits
4. Pg 7
a. Converted AVOL limits and units from 3kV/mV Min and 14kV/mV typ to 130dB and 143dB respectively
5. Pg 8 ±5V electrical Specs
a. Added ISL28417 B & C grade VOS and limits
6. Pg 9
a. Added ISL28417 B & C grade TCVOS and limits
b. Added ISL28417 B & C grade TCIOS and limits
c. Converted AVOL limits and units from 3kV/mV Min and 14kV/mV Typ to 130dB and 143dB respectively
7. Pg 17 Applications Information
a. Added Unused Channels paragraph and Figure 54.
7/12/11
FN6632.7
1. Releasing ISL28217FUZ MSOP Grade C package. Remove 'Coming Soon' from Order Information Table
2. Page 5, added: Machine Model (ISL28217 MSOP only). . . . . 300V
3. Under Electrical Spec ±15V and ±5V tables, changed Typical Rise Time and Fall Time from: Rise Time 100ns,
Fall Time 120ns, to: Rise Time 130ns, Fall Time 130ns.
4. Under Electrical Spec ±15V and ±5V table for Vos and TCVos, added in row for ISL28217 MSOP Grade C
package. Added Vos and TCVos limits for 25C and Full Temp.
5. For Typical performance curves for Vos Histograms, added note that histogram is based on ISL28217FBBZ for
Grade B figures and ISL28217FBZ for Grade C figures. (Figures 3-6, added part number label to graph below Vs)
6. Under Electrical Spec ±15V and ±5V tables, changed TYP for Open Loop Gain from 18,000V/mV to
14,000V/mV
12/2/10
FN6632.6
1. Updated “Ordering Information” table on page 2. Removed Coming Soon for ISL28117FRTBZ and
ISL28117FUBZ parts. Added in the Vos (MAX) numbers in those rows (75 and 70 respectively).
2. Corrected part marking in “Ordering Information” table on page 2 for ISL28117FRTZ from 8117 -C to -C 8117
3. Corrected part marking in “Ordering Information” table on page 2 for ISL28217FRTZ from 8217 -C to -C 8217
4. Updated Tape & Reel note in “Ordering Information” table on page 2 from "Add "-T7", "-T7A" or "-T13" suffix
for tape and reel." to new standard "Add "-T*" suffix for tape and reel." The "*" covers all possible tape and reel
options
5. Updated “Electrical Specifications” Table for “V_OS” on page 6 and “TCVOS” on page 7
a. Added data row for Offset Voltage; MSOP Grade B Package; ISL28117
b. Added data row for Offset Voltage; TDFN Grade B Package; ISL28117
c. Added data row for Input Offset Voltage Temperature Coefficient; MSOP Grade B Package; ISL28117
d. Added data row for Input Offset Voltage Temperature Coefficient; TDFN Grade B Package; ISL28117
6. Removed "Temperature data established by characterization" from common conditions of spec table.
Removed note "Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified.
Temperature limits established by characterization and are not production tested." from Min Max columns of
spec table. Replaced with new standard note in Min Max columns, “Compliance to datasheet limits is assured
by one or more methods: production test, characterization and/or design.”
25
October 13, 2011
FN6632.8