ISL32173E Datasheet, PDF (22/22 Pages) Intersil Corporation – QUAD, ±16.5kV ESD Protected, 3.0V to 5.5V, RS-485/RS-422 Receivers

ISL32173E, ISL32175E, ISL32177E, ISL32273E, ISL32275E, ISL32277E
Thin Shrink Small Outline Package Family (TSSOP)
0.25 M C A B
D
A
N
(N/2)+1
E E1
PIN #1 I.D.
1
B
TOP VIEW
(N/2)
0.20 C B A
2X
N/2 LEAD TIPS
C
e
0.05
H
SEATING
PLANE
0.10 C
N LEADS
b
0.10 M C A B
SIDE VIEW
SEE DETAIL “X”
MDP0044
THIN SHRINK SMALL OUTLINE PACKAGE FAMILY
MILLIMETERS
SYMBOL 14 LD 16 LD 20 LD 24 LD 28 LD TOLERANCE
A
1.20 1.20 1.20 1.20 1.20
Max
A1
0.10 0.10 0.10 0.10 0.10
±0.05
A2
0.90 0.90 0.90 0.90 0.90
±0.05
b
0.25 0.25 0.25 0.25 0.25 +0.05/-0.06
c
0.15 0.15 0.15 0.15 0.15 +0.05/-0.06
D
5.00 5.00 6.50 7.80 9.70
±0.10
E
6.40 6.40 6.40 6.40 6.40
Basic
E1
4.40 4.40 4.40 4.40 4.40
±0.10
e
0.65 0.65 0.65 0.65 0.65
Basic
L
0.60 0.60 0.60 0.60 0.60
±0.15
L1
1.00 1.00 1.00 1.00 1.00 Reference
NOTES:
Rev. F 2/07
1. Dimension “D” does not include mold flash, protrusions or gate
burrs. Mold flash, protrusions or gate burrs shall not exceed
0.15mm per side.
2. Dimension “E1” does not include interlead flash or protrusions.
Interlead flash and protrusions shall not exceed 0.25mm per
side.
3. Dimensions “D” and “E1” are measured at dAtum Plane H.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
c
END VIEW
A ^A2
A1
L1
L
DETAIL X
GAUGE
PLANE
0.25
0° - 8°
For additional products, see www.intersil.com/product_tree
Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems as noted
in the quality certifications found at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications
at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by
Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any
infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any
patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
22
FN7529.0
November 19, 2009