ISL72028SEH Datasheet, PDF (2/19 Pages) Intersil Corporation – 3.3V Radiation Tolerant CAN Transceiver, 1Mbps, Low Power Shutdown, Split Termination Output

ISL72028SEH
Ordering Information
ORDERING/SMD
NUMBER (Note 1)
PART NUMBER
(Note 2)
TEMPERATURE RANGE
(°C)
PACKAGE
(RoHS Compliant)
PKG DWG #
5962L1522803VXC
ISL72028SEHVF
-55 to +125
8 Ld Ceramic Flat Pack
K8.A
ISL72028SEHF/PROTO
ISL72028SEHF/PROTO
-55 to +125
8 Ld Ceramic Flat Pack
K8.A
5962L1522803V9A
ISL72028SEHVX
-55 to +125
Die
ISL72028SEHX/SAMPLE
ISL72028SEHX/SAMPLE
-55 to +125
Die
ISL72028SEHEVAL1Z
Evaluation Board
NOTES:
1. Specifications for radiation tolerant QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed
in the Ordering Information table must be used when ordering.
2. These Intersil Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with both
SnPb and Pb-free soldering operations.
SPEC
Loopback Feature
VREF Output
Listen Mode
Shutdown Mode
VTHRLM
VTHFLM
VHYSLM
Supply Current, Listen Mode
Supply Current, Shutdown Mode
VREF Leakage Current
N/A: Not Applicable
Pin Configuration
Note: The package lid is
tied to ground.
TABLE 1. ISL7202xSEH PRODUCT FAMILY FEATURES TABLE
ISL72026SEH
ISL72027SEH
Yes
No
No
Yes
Yes
Yes
No
No
1150mV (Max)
1150mV (Max)
525mV (Min)
525mV (Min)
50mV (Min)
50mV (Min)
2mA (Max)
2mA (Max)
N/A
N/A
N/A
±25µA (Max)
D
GND
VCC
R
ISL72028SEH
(8 LD CERAMIC FLATPACK)
TOP VIEW
1
8
2
7
3
6
4
5
RS
CANH
CANL
VREF
ISL72028SEH
No
Yes
No
Yes
N/A
N/A
N/A
N/A
50µA (Max)
±25µA (Max)
Pin Descriptions
PIN # PIN NAME
FUNCTION
1
D CAN Driver Digital Input. The bus states are LOW = Dominant and HIGH = Recessive. Internally tied HIGH.
2 GND Ground connection.
3
VCC System power supply input (3.0V to 3.6V). The typical voltage for the device is 3.3V.
4
R CAN Data Receiver Output. The bus states are LOW = Dominant and HIGH = Recessive.
8
RS A resistor to GND from this pin controls the rise and fall time of the CAN output waveform. Drive RS HIGH to put into low power
shutdown.
7 CANH CAN bus line for low level output
6 CANL CAN bus line for high level output
5 VREF VCC/2 reference output for split mode termination.
Submit Document Feedback
2
FN8764.1
November 9, 2015