ISL59116 Datasheet, PDF (2/10 Pages) Intersil Corporation – YC to Composite Video Driver with LPF

ISL59116
Absolute Maximum Ratings (T_A = +25°C)
Supply Voltage from V_DD to GND . . . . . . . . . . . . . . . . . . . . . . . 4.2V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . V_DD +0.3V to GND -0.3V
Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 40mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C
ESD Classification
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000V
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300V
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +125°C
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests are
at the specified temperature and are pulsed tests, therefore: T_J = T_C = T_A
Electrical Specifications V_DD = 3.3V, T_A = +25°C, R_L = 150Ω to GND, unless otherwise specified.
PARAMETER
DESCRIPTION
CONDITIONS
MIN TYP MAX UNIT
INPUT CHARACTERISTICS
V_DD
I_DD
I_{DD_OFF}
V_{Y_CLAMP}
I_{Y_DOWN}
I_{Y_UP}
R_Y
V_{C_CLAMP}
R_C
I_C
V_{Y_SYNC}
V_OLS
A_{V_CY}
A_{V_CVBS}
∆A_{V_CY}
∆A_{V_CVBS}
PSRR_CY
PSRR_CVBS
V_OH
I_SC
I_ENABLE
V_IL
V_IH
R_OUT
Supply Voltage Range
Quiescent Supply Current
Shutdown Supply Current
V_IN = 500mV, EN = V_DD, no load
EN = 0V
Y Input Clamp Voltage
Y input Clamp Discharge Current
Y Input Clamp Charge Current
Y Input Resistance
C Input Clamp Voltage
C Input Resistance
C Input Bias Current
Y Input Sync Detect Voltage
I_Y = -100µA
V_Y = 0.5V
V_Y = -0.1V
0.5V < V_Y < 1V
V_Y = 0.05V, I_C = 0A
V_Y = 0.05V, 0.25V < V_C < 0.75V
V_Y = 0.3V
Output Level Shift Voltage
Voltage Gain, C-Y channel
Voltage Gain, CVBS channel
C-to-Y Channel Gain Mismatch
V_IN = 0V, no load
R_L = 150Ω
R_L = 150Ω
C/Y-to-CVBS Channel Gain Mismatch
DC Power Supply Rejection (S-Video) V_DD = 2.5V to 3.6V
DC Power Supply Rejection (Composite) V_DD = 2.5V to 3.6V
Output Voltage High Swing
V_IN = 2V, R_L = 150Ω to GND
Output Short-Circuit Current
V_IN = 2V, to GND through 10Ω
EN, EN_CLAMP Input Current
0V < V_ENx < 3.3V
Disable Threshold
Enable Threshold
Shutdown Output Impedance
EN = 0V, DC
EN = 0V, f = 4.5MHz
2.5
3.6
V
4.6
6.5
mA
0.1
0.5
µA
-30
-15
10
mV
3
5.5
7
µA
-3.7
-2.5
mA
10
MΩ
500
550
700
mV
2.0
2.5
3
kΩ
10
pA
100
150
200
mV
60
140
200
mV
1.95 1.99 2.04 V/V
1.93 1.98 2.04 V/V
-1.75 ±0.5 1.75
%
-3
±0.7
+3
%
40
60
dB
25
35
dB
2.85
3.2
V
100
145
mA
-0.2
0.2
µA
0.8
V
2.0
V
5
6.5
8
kΩ
3.4
kΩ
AC PERFORMANCE
BW_0.1dB
BW_3dB
±0.1dB Bandwidth
-3dB Bandwidth
Normalized Stopband Gain
R_L = 150Ω, C_L = 5pF
R_L = 150Ω, C_L = 5pF
f = 27MHz
5
9.0
-24.2
MHz
MHz
dB
2
FN6277.0
September 21, 2006