ISL59116 Datasheet, PDF (1/10 Pages) Intersil Corporation – YC to Composite Video Driver with LPF

®
Data Sheet
September 21, 2006
ISL59116
FN6277.0
YC to Composite Video Driver with LPF
The ISL59116 is a YC reconstruction filter with a -3dB roll-off
frequency of 9MHz and summer amplifier to create the
composite video signal. Operating from single supplies
ranging from +2.5V to +3.6V and drawing only 4.6mA
quiescent current, the ISL59116 is ideally suited for low
power, battery-operated applications. Additionally, an enable
high pin shuts the part down in under 14ns.
The ISL59116 is designed to meet the needs for very low
power and bandwidth required in battery-operated
communication, instrumentation, and modern industrial
applications such as video on demand, cable set-top boxes,
MP3 players, and HDTV. The ISL59116 is offered in a
space-saving WLCSP chipscale package guaranteed to a
0.57mm maximum height constraint and specified for
operation from -40°C to +85°C temperature range.
Pinout
ISL59116 (WLCSP)
TOP VIEW
1
2
3
A
C_IN
GND
C_OUT
B
EN_CLAMP
EN
CVBS_OUT
C
Y_IN
V_DD
Y_OUT
Features
• 3rd order 9MHz reconstruction filter
• 40V/µs slew rate
• Low supply current = 4.6mA
• Power-down current less than 1µA
• Supplies from 2.5V to 3.6V
• Rail-to-rail output
• WLCSP package
• Pb-free plus anneal available (RoHS compliant)
Applications
• Video amplifiers
• Portable and handheld products
• Communications devices
• Video on demand
• Cable set-top boxes
• Satellite set-top boxes
• MP3 players
• HDTV
• Personal video recorder
Block Diagram
+
-
Y_IN
500mV
C_IN
9MHz
5µA
9MHz
65mV
- + x2
Y_OUT
65mV
- + x2
C_OUT
EN_CLAMP
EN
+ + 65mV
- + x2 _CVBSOUT
Ordering Information
PART NUMBER
(Note)
PART MARKING
TAPE AND REEL TEMP RANGE (°C) PACKAGE (Pb-Free) PKG. DWG. #
ISL59116IIZ
116Z
7”
-40 to +85
WLCSP
W3x3.9A
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.