ISL55033 Datasheet, PDF (2/12 Pages) Intersil Corporation – 400MHz Slew Rate Enhanced Rail-to-Rail Output Gain Block

ISL55033
Absolute Maximum Ratings (T_A = +25°C)
Supply Voltage from V+ to GND . . . . . . . . . . . . . . . . . . . . . . . 5.75V
Supply Turn-On Voltage Slew Rate . . . . . . . . . . . . . . . . . . . . . 1V/µs
EN Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mA
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . V+ + 0.3V to GND - 0.3V
Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 40mA
ESD Rating:
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,500V
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300V
Charge Device Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,500V
Thermal Information
Thermal Resistance (Note 1)
θ_JA (°C/W)
12 Ld TQFN Package . . . . . . . . . . . . . . . . . . . . . . .
+57
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +125°C
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
1. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests are
at the specified temperature and are pulsed tests, therefore: T_J = T_C = T_A
Electrical Specifications V₊ = 5V, T_A = +25°C, R_L = 1kΩ to V₊/2, V_IN = 0.1VDC, Unless Otherwise Specified.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
(Note 3)
TYP
MAX
(Note 3)
UNIT
INPUT CHARACTERISTICS
V_OS
Output Offset Voltage
(Note 2)
TCV_OS
Offset Voltage Temperature Coefficient Measured from -40°C to +85°C
IB
Input Bias Current
V_IN = 0V
R_IN
Input Resistance
C_IN
Input Capacitance
OUTPUT CHARACTERISTICS
-9
-1
-3
-8.5
-6
7
0.5
9
mV
µV/°C
µA
MΩ
pF
A_CL
R_OUT
V_OH
Closed Loop Gain
Output Resistance
Positive Output Voltage Swing
V_OL
Negative Output Voltage Swing
I_SC (source) Output Short Circuit Current
I_SC (sink)
Output Short Circuit Current
POWER SUPPLY
V_OUT = 0.5V to 4V, R_L = 150Ω
A_V = +2
R_L = 1kΩ to 2.5V
R_L = 150Ω to 2.5V
R_L = 1kΩ to 2.5V
R_L = 150Ω to 2.5V
R_L = 10Ω to GND, V_IN = 1.5V
R_L = 10Ω to + 2.5V, V_IN = 0V
1.97
1.99
2.014
V/V
30
mΩ
4.7
4.75
V
4.5
4.55
V
27
50
mV
130
200
mV
50
mA
50
mA
PSRR
I_S-ON
I_S-OFF
ENABLE
Power Supply Rejection Ratio
V+ = 3V to 5.5V, R_L = Open
Supply Current - Enabled
V_IN = 0.1V, R_L = Open
Supply Current - All Amplifiers Disabled R_L = Open
65
83
dB
18.5
21.3
24.5
mA
275
486
900
µA
t_EN
t_DS
V_IH-ENB
V_IL-ENB
Enable Time
Disable Time
ENABLE Pin Voltage for Power-Up
ENABLE Pin Voltage for Shut-Down
R_L = 150Ω, V_IN = 0.5V
R_L = 150Ω, V_IN = 0.5V
250
ns
25
ns
0.8
V
2
V
2
FN6346.0
September 11, 2008