ISL54500 Datasheet, PDF (2/13 Pages) Intersil Corporation – +1.8V to +5.5V, 5OHM, Single SPDT Analog Switch

ISL54500
Ordering Information
PART NUMBER
(Notes 1, 4)
PART MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
(Tape and Reel)
PKG. DWG. #
ISL54500IRUZ-T (Note 2) 0
-40 to +85
6 Ld µTDFN
L6.1.2x1.0A
ISL54500IHZ-T (Note 3) 4500
-40 to +85
6 Ld SOT-23
MDP0038
NOTES:
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials
and NiPdAu plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free
requirements of IPC/JEDEC J STD-020.
3. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both
SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
4. For Moisture Sensitivity Level (MSL), please see device information page for ISL54500. For more information on MSL please
see techbrief TB363.
Pin Configuration (Note 5)
ISL54500
(6 LD ΜTDFN)
TOP VIEW
NO ¹
GND 2
NC ₃
6 _IN
5 _V+
4 COM
ISL54500
(6 LD SOT-23)
TOP VIEW
NC 1
IN 2
NO 3
6 GND
5 COM
4 _V+
NOTE:
5. Switches Shown for Logic “0” Input.
Truth Table
LOGIC
PIN NC
PIN NO
0
ON
OFF
1
OFF
ON
NOTE: Logic “0” ≤0.5V. Logic “1” ≥1.4V with a 3V supply.
Pin Descriptions
µTDFN SOT-23
PIN
PIN
NAME NUMBER NUMBER
FUNCTION
V+
5
4
System Power Supply Input
(+1.8V to +5.5V)
GND
2
6
Ground Connection
IN
6
2
Digital Control Input
COM
4
5
Analog Switch Common Pin
NO
1
3
Analog Switch Normally Open
Pin
NC
3
1
Analog Switch Normally
Closed Pin
2
FN6549.2
November 9, 2009