ISL4089_06 Datasheet, PDF (2/9 Pages) Intersil Corporation – DC-Restored Video Amplifier

ISL4089
Absolute Maximum Ratings (T_A = 25°C)
Voltage between V+ and GND . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5V
Voltage between IN+, IN-, HOLD, V_REF and GND
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND -0.5;V+ +0.5V
Supply Turn-on Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . 1V/µs
Digital and Analog Input Current (Note 1) . . . . . . . . . . . . . . . . 50mA
Output Current (Continuous) . . . . . . . . . . . . . . . . . . . . . . . . . . 60mA
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7). . . .3000V
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250V
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
Operating Junction Temperature . . . . . . . . . . . . . . .-40°C to +125°C
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: T_J = T_C = T_A
DC Electrical Specifications V+ = +5V, Load = 1kΩ; T_A = +25°C
PARAMETER
DESCRIPTION
CONDITION
AMPLIFIER SECTION (HOLD = 5V)
Ib+
IN+ Input Bias Current
Ib-
IN- Input Bias Current
A_VOL
Open Loop Gain
V_OUT+
High Output Level
V_OUT-
Low Output Level
I_SC
Short Circuit Current
RESTORE SECTION
V_IN+ = 2.5V
V_IN- = 1.3V
R_L = 1k
IL = 0mA
V_OS, Comp
I_OUT
PSRR
Composite Input Offset Voltage
Restoring Current Available
Power Supply Rejection Ratio
V_REF = 0V to +2.5V
V+ = 5V to 6V
Ib V_REF
V_H HOLD
V_L HOLD
I_IH, Hold
I_IL, Hold
I_S
V_REF Input Bias Current
HOLD Logic Input Low
HOLD Logic Input High
HOLD Input Current @ Logic High
HOLD Input Current @ Logic Low
Supply Current
V_REF = +2.5V
V_HOLD = 5V
V_HOLD = 0V
V_HOLD = 0V
MIN TYP MAX UNIT
-7
20
µA
-30
-1
µA
60
dB
3.5
V
5
mV
100
mA
10
15
mV
300
µA
70
90
dB
-0.8
-0.5
-0.2
µA
0.8
V
2.0
V
-15
30
µA
-5
5
µA
17
20
23
mA
AC Electrical Specifications V_S = +5V, V_REF = 0V_DC, R_L = 150Ω, R_F and R_G = 475Ω; A_V = 2, T_A = +25°C.
PARAMETER
DESCRIPTION
CONDITION
MIN TYP
AMPLIFIER SECTION
SR
Slew Rate; 2V_P-P, 20% to 80%
300
tr, tf
Output Rise and Fall Times
V_OUT = 0.2Vp-p; 10% to 90%
3.2
tpd
Propagation Delay, IN+ to Output
V_OUT = 0.2V; 10% to 10%
0.3
-3dB BW
Small Signal; Unity Gain
R_F = 0; R_G = inf.; C_L = 0.6pF,
300
V_OUT = 0.2V_P-P
Large Signal; Unity Gain
R_F = 0; R_G = inf.; C_L = 0.6pF,
95
V_OUT = 2V_P-P
Small Signal; A_V = +2
C_L = 0.6pF, V_OUT = 0.2V_P-P
150
Large Signal; A_V = +2
C_L = 0.6pF, V_OUT = 2V_P-P
85
MAX UNITS
V/µs
ns
ns
MHz
MHz
MHz
MHz
2
FN6192.1
June 28, 2006