ISL31490E_10 Datasheet, PDF (2/27 Pages) Intersil Corporation – ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range

ISL31490E, ISL31491E, ISL31492E, ISL31493E, ISL31495E, ISL31496E,
PART NUMBER
ISL31490E
ISL31491E
ISL31492E
ISL31493E
ISL31495E
ISL31496E
ISL31498E
HALF/FULL
DUPLEX
Full
Full
Half
Full
Half
Full
Half
TABLE 1. SUMMARY OF FEATURES
DATA RATE
(Mbps)
0.25
SLEW-RATE
LIMITED?
Yes
EN
PINS?
Yes
HOT
PLUG?
Yes
QUIESCENT LOW POWER
I_CC (mA)
SHDN?
2.3
Yes
PIN
COUNT
10, 14
0.25
Yes
No
Yes
2.3
No
8
0.25
Yes
Yes
Yes
2.3
Yes
8
1
Yes
Yes
Yes
2.3
Yes
10, 14
1
Yes
Yes
Yes
2.3
Yes
8
15
No
Yes
Yes
2.3
Yes
10, 14
15
No
Yes
Yes
2.3
Yes
8
Ordering Information
PART NUMBER
(Notes 3, 4)
PART
MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL31490EIBZ (Note 1)
ISL31490 EIBZ
-40 to +85
14 Ld SOIC
M14.15
ISL31490EIUZ (Note 1)
1490E
-40 to +85
10 Ld MSOP
M10.118
ISL31490EIRTZ (Note 1)
490E
-40 to +85
10 Ld TDFN
L10.3x3A
ISL31491EIBZ (Note 1)
31491 EIBZ
-40 to +85
8 Ld SOIC
M8.15
ISL31492EIBZ (Note 1)
31492 EIBZ
-40 to +85
8 Ld SOIC
M8.15
ISL31492EIUZ (Note 1)
1492E
-40 to +85
8 Ld MSOP
M8.118
ISL31492EIPZ (Note 2)
31492 EIPZ
-40 to +85
8 Ld PDIP
E8.3
ISL31492EIRTZ (Note 1)
492E
-40 to +85
8 Ld TDFN
L8.3x3A
ISL31493EIBZ (Note 1)
ISL31493 EIBZ
-40 to +85
14 Ld SOIC
M14.15
ISL31493EIUZ (Note 1)
1493E
-40 to +85
10 Ld MSOP
M10.118
ISL31495EIBZ (Note 1)
31495 EIBZ
-40 to +85
8 Ld SOIC
M8.15
ISL31495EIUZ (Note 1)
1495E
-40 to +85
8 Ld MSOP
M8.118
ISL31496EIBZ (Note 1)
ISL31496 EIBZ
-40 to +85
14 Ld SOIC
M14.15
ISL31496EIUZ (Note 1)
1496E
-40 to +85
10 Ld MSOP
M10.118
ISL31498EIBZ (Note 1)
31498 EIBZ
-40 to +85
8 Ld SOIC
M8.15
ISL31498EIUZ (Note 1)
1498E
-40 to +85
8 Ld MSOP
M8.118
NOTES:
1. Add “-T” suffix for tape and reel. Please refer to TB347 for details on reel specifications.
2. Pb-free PDIPs can be used for through-hole wave solder processing only. They are not intended for use in Reflow solder
processing applications.
3. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both
SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
4. For Moisture Sensitivity Level (MSL), please see device information pages for ISL31490E, ISL31491E, ISL31492E, ISL31493E,
ISL31495E, ISL31496E, ISL31498E. For more information on MSL please see techbrief TB363.
2
FN7637.0
June 17, 2010