HCS11MS Datasheet, PDF (2/6 Pages) Intersil Corporation – Radiation Hardened Triple 3-Input AND Gate

Specifications HCS11MS
Absolute Maximum Ratings
Reliability Information
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +7.0V
Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VCC +0.5V
DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mA
DC Drain Current, Any One Output. . . . . . . . . . . . . . . . . . . . . . .±25mA
(All Voltage Reference to the VSS Terminal)
Storage Temperature Range (TSTG) . . . . . . . . . . . -65^oC to +150^oC
Lead Temperature (Soldering 10sec) . . . . . . . . . . . . . . . . . . +265^oC
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175^oC
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Thermal Impedance . . . . . . . . . . . . . . . .
θ_ja
Weld Seal DIC . . . . . . . . . . . . . . . . . . . 75^oC/W
Weld Seal Flat Pack . . . . . . . . . . . . . . 64^oC/W
θ_jc
16^oC/W
12^oC/W
Power Dissipation per Package (PD)
For T_A = -55^oC to +100^oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1W
For T_A = +100^oC to +125^oC Derate Linearly at 13mW/^oC
CAUTION: As with all semiconductors, stress listed under “Absolute Maximum Ratings” may be applied to devices (one at a time) without resulting in permanent
damage. This is a stress rating only. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. The conditions listed
under “Electrical Performance Characteristics” are the only conditions recommended for satisfactory device operation..
Operating Conditions
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Input Rise and Fall Times at 4.5V VCC (TR, TF) . . . . . 100ns/V Max
Operating Temperature Range (T_A) . . . . . . . . . . . . -55^oC to +125^oC
Input Low Voltage (VIL). . . . . . . . . . . . . . . . . . . 0.0V to 30% of VCC
Input High Voltage (VIH) . . . . . . . . . . . . . . . . . . 70% of VCC to VCC
TABLE 1. DC. ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETERS
Quiescent Current
SYMBOL
ICC
(NOTE 1)
CONDITIONS
VCC = 5.5V,
VIN = VCC or GND
Output Current
(Sink)
IOL
VCC = 4.5V, VIH = 4.5V,
VOUT = 0.4V, VIL = 0V
Output Current
(Source)
Output Voltage Low
Output Voltage High
Input Leakage
Current
IOH
VOL
VOH
IIN
VCC = 4.5V, VIH = 4.5V,
VOUT = VCC -0.4V,
VIL = 0V
VCC = 4.5V, VIH = 3.15V,
IOL = 50µA, VIL = 1.35V
VCC = 5.5V, VIH = 3.85V,
IOL = 50µA, VIL = 1.65V
VCC = 4.5V, VIH = 3.15V,
IOH = -50µA, VIL = 1.35V
VCC = 5.5V, VIH = 3.85V,
IOH = -50µA, VIL = 1.65V
VCC = 5.5V, VIN = VCC or
GND
Noise Immunity
Functional Test
FN
VCC = 4.5V,
VIH = 0.70(VCC),
VIL = 0.30(VCC) (Note 2)
GROUP
A SUB-
GROUPS
1
2, 3
1
2, 3
1
2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1
2, 3
7, 8A, 8B
TEMPERATURE
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
+25^oC, +125^oC, -55^oC
+25^oC, +125^oC, -55^oC
+25^oC, +125^oC, -55^oC
+25^oC, +125^oC, -55^oC
+25^oC
+125^oC, -55^oC
+25^oC, +125^oC, -55^oC
NOTE:
1. All voltages reference to device GND.
2. For functional tests VO ≥ 4.0V is recognized as a logic “1”, and VO ≤ 0.5V is recognized as a logic “0”.
LIMITS
MIN MAX UNITS
-
10
µA
-
200
µA
4.8
-
mA
4.0
-
mA
-4.8
-
mA
-4.0
-
mA
-
0.1
V
-
0.1
V
VCC
-
V
-0.1
VCC
-
V
-0.1
-
±0.5
µA
-
±5.0
µA
-
-
-
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate
and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
7-136