English
Language : 

HC-5504B Datasheet, PDF (2/9 Pages) Intersil Corporation – EIA/ITU PABX SLIC with 40mA Loop Feed
HC-5504B
Absolute Maximum Ratings (Note 1)
Maximum Continuous Supply Voltages
(VB-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -60V to 0.5V
(VB+) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 15V
(VB+ - VB-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75V
Relay Drive Voltage (VRD) . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 15V
Operating Conditions
Operating Temperature Range
HC-5504B-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to 75oC
HC-5504B-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to 85oC
Relay Driver Voltage (VRD) . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 12V
Positive Supply Voltage (VB+) . . . . . . . 4.75 to 5.25 or 10.8 to 13.2V
Negative Supply Voltage (VB-). . . . . . . . . . . . . . . . . . . . . -42 to -58V
High Level Logic Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . 2.4V
Low Level Logic Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6V
Loop Resistance (RL) . . . . . . . . . . . . . . . . . . . . . . . . . 200 to 1200Ω
Thermal Information
Thermal Resistance (Typical, Note 2)
θJA (oC/W)
CERDIP Package. . . . . . . . . . . . . . . . . . . . . . . . . . .
52
PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65
PLCC Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75
Maximum Junction Temperature (Hermetic Packages) . . . . . .175oC
Maximum Junction Temperature (Plastic Packages) . . . . . . . .150oC
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . .300oC
(PLCC and SOIC - Lead Tips Only)
Die Characteristics
Transistor Count. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Diode Count. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Die Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 x 102
Substrate Potential. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connected
Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bipolar-DI
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. Absolute maximum ratings are limiting values, applied individually, beyond which the serviceability of the circuit may be impaired.
Functional operability under any of these conditions is not necessarily implied.
2. θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications
UTAnl=es2s5OoCth. eMrwini-sMeaSxpPeacirfiaemde, tVeBrs-
= -48V, VB+ = 12V and 5V, AG =
are Over Operating Temperature
BG = DG
Range
=
0V,
Typical
Parameters
PARAMETER
CONDITIONS
MIN
TYP
MAX UNITS
On Hook Power Dissipation
Off Hook Power Dissipation
Off Hook IB+
Off Hook IB+
Off Hook IB-
Off Hook Loop Current
Off Hook Loop Current
Off Hook Loop Current
Fault Currents
TIP to Ground
ILONG = 0 (Note 3), VB+ = 12V
RL = 600Ω, ILONG = 0 (Note 3), VB+ = 12V
RL = 600Ω, ILONG = 0 (Note 3), TA = -40oC
RL = 600Ω, ILONG = 0 (Note 3), TA = 25oC
RL = 600Ω, ILONG = 0 (Note 3)
RL = 1200Ω, ILONG = 0 (Note 3)
RL = 1200Ω, VB- = -42V, ILONG = 0 (Note 3)
TA = 25oC
RL = 200Ω, ILONG = 0 (Note 3)
-
170
235
mW
-
425
550
mW
-
-
6.0
mA
-
-
5.3
mA
-
35
41
mA
-
21
-
mA
17.5
-
-
mA
36
41
48
mA
-
14
-
mA
RING to Ground
-
55
-
mA
TIP to RING
-
41
-
mA
TIP and RING to Ground
-
55
-
mA
Ring Relay Drive VOL
Ring Relay Driver Off Leakage
Ring Trip Detection Period
IOL = 62mA
VRD = 12V, RC = 1 = HIGH, TA = 25oC
RL = 600Ω
-
0.2
0.5
V
-
-
100
µA
-
2
3
Ring
Cycles
Switch Hook Detection Threshold
SHD = VOL
SHD = VOH
10
-
-
-
-
mA
5
mA
52