HA4201_06 Datasheet, PDF (2/8 Pages) Intersil Corporation – 480MHz, 1x1 Video Crosspoint Switch with Tally Output

HA4201
Absolute Maximum Ratings
Voltage Between V+ and V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V_SUPPLY
Digital Input Current (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . ±25mA
Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . . . 1800V
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JA (°C/W)
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
170
Maximum Junction Temperature (Die) . . . . . . . . . . . . . . . . . . +175°C
Maximum Junction Temperature (Plastic Package) . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . -65°C to +150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . +300°C
(SOIC - Lead Tips Only)
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. θ_JA is measured with the component mounted on an evaluation PC board in free air.
2. If an input signal is applied before the supplies are powered up, the input current must be limited to this maximum value.
Electrical Specifications
PARAMETER
V_SUPPLY = ±5V, R_L = 10kΩ, V_EN = 2.0V, Unless Otherwise Specified
TEST CONDITIONS
TEMP.
(°C)
MIN
DC SUPPLY CHARACTERISTICS
Supply Voltage
Full
±4.5
Supply Current (V_OUT = 0V)
ANALOG DC CHARACTERISTICS
V_EN = 2.0V
V_EN = 2.0V
V_EN = 0.8V
V_EN = 0.8V
25, 70
-
0
-
25, 70
-
0
-
Output Voltage Swing without Clipping
V_OUT = V_IN ± V_IO ± 20mV
25, 70
±2.7
0
±2.4
Output Current
Full
15
Input Bias Current
Full
-
Output Offset Voltage
25
-10
Output Offset Voltage Drift (Note 3)
Full
-
SWITCHING CHARACTERISTICS
Turn-On Time
25
-
Turn-Off Time
25
-
DIGITAL DC CHARACTERISTICS
Input Logic High Voltage
Full
2
Input Logic Low Voltage
Full
-
EN Input Current
Tally Output High Voltage
Tally Off Leakage Current
AC CHARACTERISTICS
V_EN = 0 to 4V
I_OH = 1mA
V_TALLY = 0V, -5V
Full
-2
Full
4.7
Full
-20
Insertion Loss
-3dB Bandwidth
1V_P-P
R_S = 82Ω, C_L = 10pF
R_S = 43Ω, C_L = 15pF
R_S = 36Ω, C_L = 21pF
Full
-
-
25
-
25
-
TYP
±5.0
10.5
-
100
100
±2.8
±2.5
20
30
-
25
160
320
-
-
-
4.8
-
0.04
480
380
370
MAX
UNITS
±5.5
V
13
mA
14.5
mA
115
μA
125
μA
-
V
-
V
-
mA
50
μA
10
mV
50
μV/°C
-
ns
-
ns
-
V
0.8
V
2
μA
-
V
20
μA
0.05
dB
-
MHz
-
MHz
-
MHz
2
FN3680.6
March 8, 2007