HA4201_06 Datasheet, PDF (1/8 Pages) Intersil Corporation – 480MHz, 1x1 Video Crosspoint Switch with Tally Output

®
Data Sheet
March 8, 2007
HA4201
FN3680.6
480MHz, 1x1 Video Crosspoint
Switch with Tally Output
The HA4201 is a very wide bandwidth 1x1 crosspoint switch
ideal for professional video switching, HDTV, computer
monitor routing, and other high performance applications.
The circuit features very low power dissipation (105mW
Enabled, 1mW Disabled), excellent differential gain and
phase, and very high off isolation. When disabled, the output
is switched to a high impedance state, making the HA4201
ideal for routing matrix equipment.
The HA4201 requires no external current source, and
features fast switching and symmetric slew rates. The tally
output is an open collector PNP transistor to V_CC , and is
activated whenever EN = 1 to provide an indication of
crosspoint selection.
For applications which don’t require a TALLY output, please
refer to the HA4600 data sheet.
Pinout
HA4201
(8 LD SOIC)
TOP VIEW
EN 1
V- 2
V+ 3
OUT 4
8 GND
7 IN
6 NC
5 TALLY
Truth Table
EN
0
1
OUT
High Z
Active
TALLY
Off
On
Features
• Low Power Dissipation . . . . . . . . . . . . . . . . . . . . . 105mW
• Symmetrical Slew Rates . . . . . . . . . . . . . . . . . . 1700V/μs
• 0.1dB Gain Flatness. . . . . . . . . . . . . . . . . . . . . . . 250MHz
• Off Isolation (100MHz) . . . . . . . . . . . . . . . . . . . . . . . 85dB
• Differential Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.01%
• Differential Phase . . . . . . . . . . . . . . . . . . . . . 0.01 Degrees
• High ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . >1800V
• TTL Compatible Enable Input
• Open Collector Tally Output
• Improved Replacement for GX4201
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Professional Video Switching and Routing
• Video Multiplexers
• HDTV
• Computer Graphics
• RF Switching and Routing
• PCM Data Routing
Ordering Information
PART
NUMBER
PART
MARKING
TEMP.
RANGE
(°C)
PKG.
PACKAGE DWG. #
HA4201CB96 4201C B
0 to +70 8 Ld SOIC
Tape and
Reel
M8.15
HA4201CBZ96 4201C BZ
(Note)
0 to +70 8 Ld SOIC
(Pb-free)
M8.15
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.