HA-5330_04 Datasheet, PDF (2/5 Pages) Intersil Corporation – 650ns Precision Sample and Hold Amplifier

HA-5330
Absolute Maximum Ratings
Voltage between V+ and SUPPLY/SIG GND . . . . . . . . . . . . . . .+20V
Voltage between V- and SUPPLY/SIG GND . . . . . . . . . . . . . . . -20V
Voltage between SUPPLY GND and SIG GND . . . . . . . . . . . . ±2.0V
Voltage between S/H Control and SUPPLY/SIG GND . . . . +8V, -6V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24V
Output Current, Continuous (Note 1) . . . . . . . . . . . . . . . . . . . ±17mA
Supply Voltage Range (Typical) . . . . . . . . . . . . . . . . . ±10V to ±20V
Thermal Information
Thermal Resistance (Typical, Note 3)
θ_JA (^oC/W) θ_JC (^oC/W)
CERDIP Package. . . . . . . . . . . . . . . . .
66
16
Maximum Junction Temperature (Ceramic Package, Note 2) . . .175^oC
Maximum Storage Temperature Range . . . . . . . . . . -65^oC to 150^oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300^oC
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 0^oC to 75^oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. Internal Power Dissipation may limit Output Current below ±17mA.
2. Maximum power dissipation, including output load, must be designed to maintain the junction temperature below 175^oC for the ceramic package.
3. θ_JA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications
PARAMETER
V_SUPPLY = ±15V; S/H Control V_IL = +0.8V (Sample): V_IH = +2.0V (Hold); SIG GND = SUPPLY GND,
Unity Gain Configuration (Output tied to -Input), Unless Otherwise Specified
TEST CONDITIONS
TEMP (^oC) MIN
TYP
MAX UNITS
INPUT CHARACTERISTICS
Input Voltage Range
Full
±10
-
-
V
Input Resistance (Note 4)
25
5
15
-
MΩ
Input Capacitance
25
-
3
-
pF
Offset Voltage
25
-
0.2
-
mV
Offset Voltage Temperature Coefficient
Full
-
-
1.5
mV
Full
-
1
10
µV/^oC
Bias Current
25
-
±20
-
nA
Full
-
-
±300
nA
Offset Current
25
-
20
-
nA
Full
-
-
300
nA
Common Mode Range
Full
±10
-
-
V
CMRR
TRANSFER CHARACTERISTICS
Gain
V_CM = ±10V
DC
Full
86
100
-
dB
Full
2 x 10⁶ 2 x 10⁷
-
V/V
Gain Bandwidth Product
Note 12
25
-
4.5
-
MHz
OUTPUT CHARACTERISTICS
Output Voltage
Full
±10
-
-
V
Output Current
Full
±10
-
-
mA
Full Power Bandwidth (Note 6)
25
-
1.4
-
MHz
Output Resistance
Hold Mode
Sample Mode
25
-
0.2
-
Ω
25
-
10^-5 0.001
Ω
Total Output Noise, DC to 4MHz
TRANSIENT RESPONSE
Sample Mode
Hold Mode
-
230
-
µV_RMS
25
-
190
-
µV_RMS
Rise Time
Note 5
25
-
70
-
ns
Overshoot
Note 5
25
-
10
-
%
2