DG411_06 Datasheet, PDF (2/13 Pages) Intersil Corporation – Monolithic Quad SPST, CMOS Analog Switches

DG411, DG412, DG413
Ordering Information
PART NUMBER
DG411DJ
DG411DJZ (Note)
DG411DY*
DG411DYZ* (Note)
PART MARKING
DG411DJ
DG411DJZ
DG411DY
DG411DYZ
TEMP. RANGE (°C)
-40 to +85
-40 to +85
-40 to +85
-40 to +85
PACKAGE
16 Ld PDIP
16 Ld PDIP** (Pb-free)
16 Ld SOIC
16 Ld SOIC (Pb-free)
PKG. DWG. #
E16.3
E16.3
M16.15
M16.15
DG411DVZ* (Note)
DG412DJ
DG412DJZ (Note)
DG412DY*
DG412DYZ* (Note)
DG412DVZ* (Note)
DG413DJ
DG413DJZ (Note)
DG413DY*
DG413DYZ* (Note)
DG413DVZ* (Note)
DG411 DVZ
DG412DJ
DG412DJZ
DG412DY
DG412DYZ
DG412 DVZ
DG413DJ
DG413DJZ
DG413DY
DG413DYZ
DG413 DVZ
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
16 Ld TSSOP (Pb-free)
16 Ld PDIP
16 Ld PDIP** (Pb-free)
16 Ld SOIC
16 Ld SOIC (Pb-free)
16 Ld TSSOP (Pb-free)
16 Ld PDIP
16 Ld PDIP** (Pb-free)
16 Ld SOIC
16 Ld SOIC (Pb-free)
16 Ld TSSOP (Pb-free)
M16.173
E16.3
E16.3
M16.15
M16.15
M16.173
E16.3
E16.3
M16.15
M16.15
M16.173
*Add “-T” suffix for tape and reel.
**Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing
applications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
TRUTH TABLE
DG411 DG412
DG413
LOGIC SWITCH SWITCH
SWITCH
1, 4
SWITCH
2, 3
0
On
Off
Off
On
1
Off
On
On
Off
NOTE: Logic “0” ≤0.8V. Logic “1” ≥2.4V.
Pinout
DG411, DG412, DG413
(16 LD PDIP, SOIC, TSSOP)
TOP VIEW
IN₁ 1
D₁ 2
S₁ 3
V- 4
GND 5
S₄ 6
D₄ 7
IN₄ 8
16 IN₂
15 D₂
14 S₂
13 V+
12 V_L
11 S₃
10 D₃
9 IN₃
Pin Descriptions
PIN SYMBOL
DESCRIPTION
1
IN₁
Logic Control for Switch 1.
2
D₁
Drain (Output) Terminal for Switch 1.
3
S₁
Source (Input) Terminal for Switch 1.
4
V-
Negative Power Supply Terminal.
5
GND Ground Terminal (Logic Common).
6
S₄
Source (Input) Terminal for Switch 4.
7
D₄
Drain (Output) Terminal for Switch 4.
8
IN₄
Logic Control for Switch 4.
9
IN₃
Logic Control for Switch 3.
10
D₃
Drain (Output) Terminal for Switch 3.
11
S₃
Source (Input) Terminal for Switch 3.
12
V_L
Logic Reference Voltage.
13
V+
Positive Power Supply Terminal (Substrate).
14
S₂
Source (Input) Terminal for Switch 2.
15
D₂
Drain (Output) Terminal for Switch 2.
16
IN₂
Logic Control for Switch 2.
2
FN3282.12
November 27, 2006