X9241A_15 Datasheet, PDF (15/17 Pages) Intersil Corporation – Non-Volatile/Low Power/2-Wire/64 Taps

X9241A
Thin Shrink Small Outline Package Family (TSSOP)
0.25 M C A B
D
A
N
(N/2)+1
E E1
PIN #1 I.D.
1
B
TOP VIEW
(N/2)
0.20 C B A
2X
N/2 LEAD TIPS
C
e
0.05
H
SEATING
PLANE
0.10 C
N LEADS
b
0.10 M C A B
SIDE VIEW
SEE DETAIL “X”
MDP0044
THIN SHRINK SMALL OUTLINE PACKAGE FAMILY
MILLIMETERS
SYMBOL 14 LD 16 LD 20 LD 24 LD 28 LD TOLERANCE
A
1.20 1.20 1.20 1.20 1.20
Max
A1
0.10 0.10 0.10 0.10 0.10
±0.05
A2
0.90 0.90 0.90 0.90 0.90
±0.05
b
0.25 0.25 0.25 0.25 0.25 +0.05/-0.06
c
0.15 0.15 0.15 0.15 0.15 +0.05/-0.06
D
5.00 5.00 6.50 7.80 9.70
±0.10
E
6.40 6.40 6.40 6.40 6.40
Basic
E1
4.40 4.40 4.40 4.40 4.40
±0.10
e
0.65 0.65 0.65 0.65 0.65
Basic
L
0.60 0.60 0.60 0.60 0.60
±0.15
L1
1.00 1.00 1.00 1.00 1.00 Reference
NOTES:
Rev. F 2/07
1. Dimension “D” does not include mold flash, protrusions or gate
burrs. Mold flash, protrusions or gate burrs shall not exceed
0.15mm per side.
2. Dimension “E1” does not include interlead flash or protrusions.
Interlead flash and protrusions shall not exceed 0.25mm per
side.
3. Dimensions “D” and “E1” are measured at dAtum Plane H.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
c
END VIEW
A ^A2
A1
L1
L
DETAIL X
GAUGE
PLANE
0.25
0° - 8°
15
FN8164.7
August 17, 2015