ISL22316_15 Datasheet, PDF (15/16 Pages) Intersil Corporation – Low Noise, Low Power I2C™ Bus,128 Taps

ISL22316
Package Outline Drawing
L10.3x3B
10 LEAD THIN DUAL FLAT PACKAGE (TDFN) WITH E-PAD
Rev 4, 4/15
3.00
A
B
5
PIN 1
INDEX AREA
TOP VIEW
(4X) 0.15
10
6
1.64 +0.1/ -0.15
BOTTOM VIEW
5
PIN #1 INDEX AREA
1
2
0.25 +0.05/ - 0.07
10x 0.40 +/- 0.1
(10X0.25)
(10x0.60)
(8x 0.50)
1.64
2.80 TYP
TYPICAL RECOMMENDED LAND PATTERN
SEE DETAIL "X"
0.10 C
SEATING PLANE ^C
0.05
0.08 C
SIDE VIEW
C ^{0.20 REF}
4
0.05
DETAIL "X"
NOTES:
1. Dimensions are in millimeters.
Dimensions in ( ) for Reference Only.
2. Dimensioning and tolerancing conform to AMSE Y14.5m-1994.
3. Unless otherwise specified, tolerance : Decimal ± 0.05
4. Tiebar shown (if present) is a non-functional feature and may
be located on any of the 4 sides (or ends).
5. The configuration of the pin #1 identifier is optional, but must be
located within the zone indicated. The pin #1 identifier may be
either a mold or mark feature.
15
FN6186.3
August 14, 2015