ISL22316_15 Datasheet, PDF (14/16 Pages) Intersil Corporation – Low Noise, Low Power I2C™ Bus,128 Taps

ISL22316
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make
sure that you have the latest revision.
DATE
August 14, 2015
REVISION
FN6186.3
CHANGE
- Ordering Information Table on page 1.
- Added Revision History beginning with Rev 1.
- Added About Intersil Verbiage.
-Updated L10.3x3B to most recent revision, changes are as follows:
-Revision 0 to Revision 1 Changes:
Removed from JEDEC format to comply with new standards. Changes include:
Removed table and put dimensions on package outline drawing instead
Added Typical Recommended Land Pattern
Note "Dimension b applies to the metallized terminal and is measured between 0.15mm and 0.30mm
from the terminal tip." changed to "Dimension b applies to the metallized terminal and is measured
between 0.18mm and 0.30mm from the terminal tip.
-Revision 1 to Revision 2 changes:
1. Removed mention of "b" from Note 4 since "b" does not exist on the drawing.
2. Added Note 6 callout to lead width on "Bottom View"
3. Corrected the word "indentifier" in Note 6 to read "identifier"
-Revision 2 to Revision 3 changes:
Removed package outline and included center to center distance between lands on recommended land
pattern.
Removed Note 4 "Dimension b applies to the metallized terminal and is measured between 0.18mm
and 0.30mm from the terminal tip." since it is not applicable to this package. Renumbered notes
accordingly.
-Revision 3 to Revision 4
Tiebar Note updated
From: Tiebar shown (if present) is a non-functional feature.
To: Tiebar shown (if present) is a non-functional feature and may be located on any of the 4 sides (or
ends
-Updated POD M10.118 to most current version change is as follows:
Added land pattern.
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
14
FN6186.3
August 14, 2015