ISL59482_14 Datasheet, PDF (14/15 Pages) Intersil Corporation – Dual, 500MHz Triple, Multiplexing Amplifiers

ISL59482
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you
have the latest revision.
DATE
REVISION
CHANGE
August 8, 2014
FN6209.4
Removed Important Note above Electrical Spec Table. Min and Max Note is now in its place.
Changed Tja in Thermal Information from 23 to 37.
Removed Low Effective Power Dissipation Curve and Updated High Effective Power Dissipation Curve on
page 10 showing correction from 23 to 37.
Changed "-Is Enabled" spec from -90mA to -92mA MIN, on page 4 of the datasheet.
June 20, 2012
FN6209.3
- Converted to New Intersil Template and following Intersil standards:
- Updated Pb-free bullet in Features on page 1
- Updated Caution statement per legal's new verbiage on page 4.
- Added Thermal Information, Tja and respective notes, Pb-Free Reflow link to Abs Max Table on page 4.
- Removed Tape & Reel column and part from Ordering Information on page 2 and added note which reads
"Add “-T*” suffix for tape and reel." The "*" covers all possible tape and reel options. Added Eval board and
MSL note and Added TB347 link.
- Added on page 5 Compliance note in Min Max column of spec tables which reads "Compliance to datasheet
limits is assured by one or more methods: production test, characterization and/or design."
- Updated Intersil Trademark statement at bottom of page 1 per directive from Legal.
- Added Revision History and Products Information on page 14.
- Page 4:
- Changed upper limit of "Enabled Supply Current"
from: 96mA
to: 100mA
- Changed upper limit of "Disabled Supply Current"
from: 7.6mA
to: 8mA
December 22, 2006
FN6209.2
Page 4, Electrical Specs:
General Parameter, Ib - changed MIN to -10µA and MAX to +10µA
Logic Parameter, Iil - changed MIN to -10µA and MAX to +10µA
December 15, 2006
FN6209.1
Changed spec table min/max values in +Is Enabled Min - from 80 to 77 and the
-Is Enabled Max - from -74 to -70. Replaced POD page with most updated. No to the WEB until FGs are
released. Changed PKG DWG from L48.7x7 to L48.7x7B. Changed PKG DWG in ordering information.
March 9, 2006
FN6209.0 Initial Release.
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Submit Document Feedback 14
FN6209.4
August 8, 2014