ISL28130_11 Datasheet, PDF (12/19 Pages) Intersil Corporation – Single, Dual, and Quad Micropower, Low Drift, RRIO Operational Amplifiers

ISL28130, ISL28230, ISL28430
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make
sure you have the latest revision.
DATE
REVISION
CHANGE
6/13/11
FN7623.3
• Changed minimum operating supply voltage from +1.65V to +1.8V throughout datasheet. Modified Electrical
Specifications table, beginning on page 5, for all specs related at +1.65V to +1.8V, and all other text references
accordingly.
• On page 1, paragraph 2, last sentence: changed from “All devices operate over the temperature range of -
40°C to +125°C.” to "Commercial temp range devices operate over the temperature range of 0°C to 70°C. Full
temp range devices operate over the temperature range of -40°C to 125°C."
• On page 2, Ordering Information: added "Coming Soon" to all devices with -40°C to 125°C temp range and
to ISL28130CBZ at 0°C to +70°C temp range.
3/1/11
FN7623.2
-Ordering Information Table: Removed all 'Coming Soon' under part numbers (except for ISL28130FBZ and
ISL28230FRZ), added part markings for all 125°C grade parts. Added new data column called 'TEMPERATURE
GRADE' to distinguish between 'Commercial' and 'Full' temp grades.
- Electrical Specifications Table: added new text to common conditions: "Boldface limits apply over the entire
operating temperature range". This note allows bold face limits to apply both to commercial and full grade temp
devices.
- Added over temp 0°C to 70°C spec for Vos in addition to -40°C to 125°C Vos spec. Original Vos spec of
46.8µV for -40°C to 125°C is a typo based on a TCVos of 150nV/C. -40°C to 125°C limit corrected as 55µV
over temp.
12/7/10
FN7623.1 Corrected Thermals for DFN package in “Tja from 125 to 53, “Tjc from 90 to 12”
12/3/10
Removed Part Markings from Full temp grade parts and changed to TBD until availability is validated.
12/2/10
-Updated front page text to add DFN packaging and extended temp range -40°C to +125°C
-Removed previous Ib vs Temp plot and added new -40°C to +125°C Ib vs Temp plot on front page.
-Updated ordering information table by adding a full temp range option to all parts and temp range column. Also
added in DFN part to ordering table. All full temp parts are stamped Coming Soon.
-Added DFN package to Pin Configurations table.
-Added -40°C to +125°C temp range under Operating Conditions page 5.
-Added the testing standards performance information to the ESD ratings in Abs Max Table
-Added new Input Bias Current Ib spec of 700pA MIN/MAX in Electrical Spec table for -40°C to +125°C temp
range
-Revised Note 10 for Electrical Spec table as: "Compliance to datasheet limits is assured by one or more
methods: production test, characterization and/or design."
-Updated all curves in the datasheet with 0°C to +70°C temp range to -40°C to +125°C temp range.
-Added DFN package L8.3x3J outline drawing to the end of datasheet.
10/19/10
On page 6 changed “Supply Current, Per Amplifier” from a typical of 18µA to 20µA to comply with front page.
8/17/10
FN7623.0 Initial Release
Products
Intersil Corporation is a leader in the design and manufacture of high-performance analog semiconductors. The Company's products
address some of the industry's fastest growing markets, such as, flat panel displays, cell phones, handheld products, and notebooks.
Intersil's product families address power management and analog signal processing functions. Go to www.intersil.com/products for a
complete list of Intersil product families.
For a complete listing of Applications, Related Documentation and Related Parts, please see the respective device information page on
intersil.com: ISL28130, ISL28230 , ISL28430.
To report errors or suggestions for this datasheet, please go to www.intersil.com/askourstaff
FITs are available from our website at http://rel.intersil.com/reports/search.php
12
FN7623.3
July 15, 2011