ISL28107_1110 Datasheet, PDF (10/32 Pages) Intersil Corporation – Precision Single, Dual and Quad Low Noise Operational Amplifiers

ISL28107, ISL28207, ISL28407
Electrical Specifications V_S ±5V, V_CM = 0, V_O = 0V, T_A = +25°C, unless otherwise noted. Boldface limits apply over the operating
temperature range, -40°C to +125°C. (Continued)
PARAMETER
DESCRIPTION
CONDITIONS
MIN
MAX
(Note 8) TYP (Note 8) UNIT
V_OL
Output Voltage Low
R_L = 10kΩ to ground
-40°C to +125°C
-3.7
-3.5
V
-3.2
V
R_L = 2kΩ to ground
-40°C to +125°C
-3.55
-3.3
V
-3.1
V
I_S
Supply Current/Amplifier
R_L = Open
0.21
0.29
mA
0.35
mA
I_SC
Output Short-Circuit Current
AC SPECIFICATIONS
(Note 9)
±40
mA
GBW
Gain Bandwidth Product
1
MHz
THD + N
Total Harmonic Distortion + Noise 1kHz, G = 1, V_O = 2.5V_RMS, R_L = 2kΩ
TRANSIENT RESPONSE
0.0053
%
SR
Slew Rate
A_V = 10, R_L = 2kΩ
0.32
V/µs
t_r, t_f, Small
Signal
Rise Time
10% to 90% of V_OUT
A_V = 1, V_OUT = 100mV_P-P, R_f = 0Ω,
R_L = 2kΩ to V_CM
355
ns
Fall Time
90% to 10% of V_OUT
A_V = 1, V_OUT = 100mV_P-P, R_f = 0Ω,
R_L = 2kΩ to V_CM
370
ns
t_s
Settling Time to 0.1%
A_V = -1, V_OUT = 4V_P-P, R_f = R_g = 2kΩ,
4V Step; 10% to V_OUT
R_L = 2kΩ to V_CM
12.4
µs
Settling Time to 0.01%
4V Step; 10% to V_OUT
A_V = -1, V_OUT = 4V_P-P, R_f = R_g = 2kΩ,
R_L = 2kΩ to V_CM
22
µs
NOTES:
8. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization
and are not production tested.
9. Output Short Circuit Current is the minimum current (source or sink) when the output is driven into the supply rails with R_L = 0Ω to ground.
10
FN6631.5
October 21, 2011