ISLA224S_14 Datasheet, PDF (1/38 Pages) Intersil Corporation – Dual 14-Bit, 250/200/125 MSPS JESD204B High Speed Serial Output ADC

Dual 14-Bit, 250/200/125 MSPS JESD204B High Speed
Serial Output ADC
ISLA224S
The ISLA224S is a series of low-power, high-performance,
dual-channel 14-bit, analog-to-digital converters. Designed
with FemtoCharge™ technology on a standard CMOS process,
the series supports sampling rates of up to 250MSPS. The
ISLA224S is part of a pin-compatible family of 12- and 14-bit
dual-channel A/Ds with maximum sample rates ranging from
125MSPS to 250MSPS and shares the same analog core as
Intersil's proven ISLA224P series of ADCs. The family
minimizes power consumption while providing state-of-the art
dynamic performance, offering an optimal performance-vs-
power trade-off.
Differentiating the ISLA224S from the ISLA224P is its highly
configurable, JESD204B-compliant, high speed serial output
link. The link offers data rates up to 4.375Gbps per lane and
multiple packing modes. It can be configured to use two or
three lanes to transmit the conversion data, allowing for
flexibility in the receiver design. The SERDES transmitter also
provides deterministic latency and multi-chip time alignment
support to satisfy an application's complex synchronization
requirements.
A serial peripheral interface (SPI) port allows for extensive
configurability of the JESD204B transmitter including access
to its built-in link and transport-layer test patterns. The SPI port
also provides control for numerous additional features
including the fine gain and offset adjustments of the two ADC
cores as well as the programmable clock divider, enabling 2x
and 4x harmonic clocking.
The ISLA224S is available in a space-saving 7mmx7mm 48 Ld
QFN package. The package features a thermal pad for
improved thermal performance and is specified over the full
industrial temperature range (-40°C to +85°C).
Features
• JESD204A/B High Speed Data Interface
- JESD204A Compliant
- JESD204B Device Subclass 0 Compliant
- JESD204B Device Subclass 2 Compatible
- Up to 3 JESD204 Output Lanes Running up to 4.375Gbps
- Highly Configurable JESD204 Transmitter
• Multiple Chip Time Alignment and Deterministic Latency
Support (JESD204B Device Subclass 2)
• SPI Programmable Debugging Features and Test Patterns
• 48-pin QFN 7mmx7mm Package
Key Specifications
• SNR @ 250/200/125MSPS
73.2/74.1/75.1 dBFS f_IN = 30MHz
72.4/72.9/73.2 dBFS f_IN = 190MHz
• SFDR @ 250/200/125MSPS
82/91/94 dBc f_IN = 30MHz
84/82/81 dBc f_IN = 190MHz
• Total Power Consumption: 989mW @ 250MSPS
Applications
• Radar and Satellite Antenna Array Processing
• Broadband Communications and Microwave Receivers
• High-Performance Data Acquisition
• Communications Test Equipment
• High-Speed Medical Imaging
Pin-Compatible Family
MODEL
ISLA224S25
ISLA224S20
ISLA224S12
ISLA222S25
ISLA222S20
ISLA222S12
RESOLUTION
14
14
14
12
12
12
SPEED
(MSPS)
250
200
125
250
200
125
PRODUCT
AVAILABILITY
Now
Now
Now
Now
Now
Now
FIGURE 1. SERDES DATA EYE AT 4.375Gbps
April 25, 2013
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
FN7911.2
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2011-2013. All Rights Reserved
Intersil (and design) and FemtoCharge are trademarks owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.