ISL59115 Datasheet, PDF (1/10 Pages) Intersil Corporation – Triple Channel Video Driver with LPF

®
Data Sheet
September 21, 2006
ISL59115
FN6185.2
Triple Channel Video Driver with LPF
The ISL59115 is a triple channel reconstruction filter with a
-3dB roll-off frequency of 9MHz. Operating from a single
supply ranging from +2.5V to +3.6V and drawing only 4.5mA
quiescent current, the ISL59115 is ideally suited for low
power, battery-operated applications. Additionally, enable
pins shut the part down in under 14ns.
The ISL59115 is designed to meet the bandwidth and very
low power requirements of battery-operated communication,
instrumentation, and modern industrial applications such as
video on demand, cable set-top boxes, MP3 players, and
HDTV. The ISL59115 is offered in a space-saving µTQFN
Pb-free package guaranteed to a 0.6mm maximum height
constraint and specified for operation from -40°C to +85°C
temperature range.
Pinout
ISL59115
(10 LD µTQFN)
TOP VIEW
GND
10
Y_{IN 1}
9 Y_OUT
CVBS_{IN 2}
8 ^CVBSOUT
C_IN 3
EN_{CY 4}
7 COUT
6 ENCVBS
Features
• 3rd order 9MHz reconstruction filter
• 40V/µs slew rate
• Low supply current = 4.5mA
• Maximum Power-down current <0.5µA
• Supplies from 2.5V to 3.6V
• Rail-to-rail output
• µTQFN package
• Pb-free plus anneal available (RoHS compliant)
Applications
• Video amplifiers
• Portable and handheld products
• Communications devices
• Video on demand
• Cable set-top boxes
• Satellite set-top boxes
• MP3 players
• HDTV
• Personal video recorder
Block Diagram
+
-
Y_IN
9MHz
65mV
- + x2
Y_OUT
1uA
500mV
5
VDD
65mV
C_IN
9MHz
- + x2
C_OUT
+
-
CVBS_IN
EN_CY Biasing & ^1uA
EN_CVBS
Control
9MHz
65mV
- + x2
CVBS_OUT
Ordering Information
PART NUMBER (Note) PART MARKING TAPE AND REEL TEMP. RANGE (°C) PACKAGE (Pb-Free)
PKG. DWG. #
ISL59115IRUZ-T7
FK
7”
-40 to +85
10 Ld µTQFN
L10.2.1x1.6A
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.