ISL54065_0911 Datasheet, PDF (1/15 Pages) Intersil Corporation – Negative Signal Swing, Sub-ohm, Dual SPDT

®
Data Sheet
November 3, 2009
ISL54065
FN6583.2
Negative Signal Swing, Sub-ohm, Dual
SPDT with Click and Pop Elimination
Single Supply Switch with Enable Pin
The Intersil ISL54065 device is a low ON-resistance, low
voltage, bi-directional, dual single-pole/double-throw (SPDT)
analog switch. It is designed to operate from a single +1.8V to
+6.5V supply and pass signals that swing down to 6.5V below
the positive supply rail. Targeted applications include battery
powered equipment that benefit from low r_ON (0.56Ω), low
power consumption (8nA) and fast switching speeds
(t_ON = 55ns, t_OFF = 18ns). The digital inputs are 1.8V
logic-compatible up to a +3V supply. The ISL54065 also
features integrated circuitry to eliminate click and pop noise to
an audio speaker.
The ISL54065 is offered in a small form factor package,
alleviating board space limitations. It is available in a tiny
12 Ld 2.2x1.4mm µTQFN.
The ISL54065 is a committed dual single-pole/double-throw
(SPDT) that consist of two normally open (NO) and two
normally closed (NC) switches with independent logic control.
This configuration can be used as a dual 2-to-1 multiplexer.
TABLE 1. FEATURES AT A GLANCE
ISL54065
Number of Switches
2
SW
SPDT or 2-1 MUX
4.3V r_ON
4.3V t_ON/t_OFF
2.7V r_ON
2.7V t_ON/t_OFF
1.8V r_ON
1.8V t_ON/t_OFF
Packages
0.65Ω
43ns/23ns
0.9Ω
55ns/18ns
1.8Ω
145ns/28ns
12 Ld µTQFN
ON-RESISTANCE vs SUPPLY VOLTAGE vs
SWITCH VOLTAGE
2.0
1.8 ^ICOM ^{= 100mA}
V+ = 1.8V
1.6
1.4
1.2
1.0
0.8
V+ = 2.7V
0.6
V+ = 4.5V
0.4
0.2
-6 -5 -4 -3 -2 -1 0 1 2 3 4 5
V_COM (V)
Features
• Pb-Free (RoHS Compliant)
• Single Supply Operation . . . . . . . . . . . . . . . . .+1.8V to +6.5V
• Negative Signal Swing (Max 6.5V Below V+)
• Enable Pin to Disable All Switches
• Integrated Click and Pop Elimination Circuitry
• Click and Pop Circuitry Disable Pin
• ON-Resistance (r_ON)
- V+ = +4.5V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.52Ω
- V+ = +4.3V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.65Ω
- V+ = +2.7V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9Ω
- V+ = +1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8Ω
• r_ON Matching Between Channels . . . . . . . . . . . . . . . . . 10mΩ
• r_ON Flatness Across Signal Range . . . . . . . . . . . . . . . . 0.33Ω
• Low THD+N @ 32Ω Load . . . . . . . . . . . . . . . . . . . . . . .0.02%
• Low Power Consumption @ 3V (P_D). . . . . . . . . . . . 24nW
• Fast Switching Action (V+ = +4.3V)
- t_ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43ns
- t_OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23ns
• ESD HBM Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>6kV
• Guaranteed Break-Before-Make
• 1.8V Logic Compatible (+3V supply)
• Low I+ Current when V_INH is not at the V+ Rail
• Available in 12 Ld 2.2mm x 1.4mm µTQFN Package
Applications
• Audio and Video Switching
• Battery powered, Handheld, and Portable Equipment
- MP3 and Multimedia Players
- Cellular/mobile Phones
- Pagers
- Laptops, Notebooks, Palmtops
• Portable Test and Measurement
• Medical Equipment
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008, 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.