ISL43840_14 Datasheet, PDF (1/14 Pages) Intersil Corporation – Low-Voltage, Single and Dual Supply,Dual 4 to 1 Multiplexer Analog Switch with Enable

®
Data Sheet
March 13, 2006
ISL43840
FN6056.2
Low-Voltage, Single and Dual Supply,
Dual 4 to 1 Multiplexer Analog Switch with
Enable
The Intersil ISL43840 device is a precision, bidirectional,
analog switches configured as a a dual 4 channel multiplexer/
demultiplexer designed to operate from a single +2V to +12V
supply or from a ±2V to ±6V supply. The device has two
enable bar pins to simultaneously open all signal paths of
bank A and B.
ON resistance of 39Ω with a ±5V supply and 125Ω with a
+3.3V supply. Each switch can handle rail to rail analog
signals. The off-leakage current is only .01nA at +25°C or
2.5nA at +85°C.
All digital inputs have 0.8V to 2.4V logic thresholds, ensuring
TTL/CMOS logic compatibility when using a single 3.3V or
+5V supply or dual ±5V supplies.
The ISL43840 is a dual 4 to 1 multiplexer device. Table 1
summarizes the performance of this part.
TABLE 1. FEATURES AT A GLANCE
CONFIGURATION
DUAL 4:1 MUX
±5V R_ON
±5V t_ON / t_OFF
12V R_ON
12V t_ON / t_OFF
5V R_ON
5V t_ON / t_OFF
3.3V R_ON
3.3V t_ON / t_OFF
Package
39Ω
32ns/18ns
32Ω
23ns/15ns
65Ω
38ns/19ns
125Ω
70ns/32ns
20 Ld 4x4 QFN
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
• Application Note AN520 “CMOS Analog Multiplexers and
Switches; Specifications and Application Considerations.”
• Application Note AN1034 “Analog Switch and Multiplexer
Applications”
Features
• Fully Specified at 3.3V, 5V, ±5V, and 12V Supplies for 10%
Tolerances
• ON Resistance (R_ON) Max, V_S = ±4.5V. . . . . . . . . . . 50Ω
• ON Resistance (R_ON) Max, V_S = +3V . . . . . . . . . . . 155Ω
• R_ON Matching Between Channels, V_S = ±5V . . . . . . . . <2Ω
• Low Charge Injection, V_S = ±5V . . . . . . . . . . . . . 1pC (Max)
• Single Supply Operation. . . . . . . . . . . . . . . . . . . +2V to +12V
• Dual Supply Operation . . . . . . . . . . . . . . . . . . . . . ±2V to ±6V
• Fast Switching Action (V_S = +5V)
- t_ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38ns
- t_OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19ns
• Guaranteed Max Off-leakage . . . . . . . . . . . . . . . . . . . . 2.5nA
• Guaranteed Break-Before-Make
• TTL, CMOS Compatible
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Communications Systems
- Radios
- Telecom Infrastructure
- ADSL, VDSL Modems
• Test Equipment
- Medical Ultrasound
- Magnetic Resonance Image
- CT and PET Scanners (MRI)
- ATE
- Electrocardiograph
• Audio and Video Signal Routing
• Various Circuits
- +3V/+5V DACs and ADCs
- Sample and Hold Circuits
- Operational Amplifier Gain Switching Networks
- High Frequency Analog Switching
- High Speed Multiplexing
- Integrator Reset Circuits
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003, 2004, 2006. All Rights Reserved