ICL7667CBAZA-T Datasheet, PDF (1/10 Pages) Intersil Corporation – Dual Power MOSFET Driver

®
Data Sheet
April 29, 2010
ICL7667
FN2853.6
Dual Power MOSFET Driver
The ICL7667 is a dual monolithic high-speed driver designed
to convert TTL level signals into high current outputs at
voltages up to 15V. Its high speed and current output enable
it to drive large capacitive loads with high slew rates and low
propagation delays. With an output voltage swing only
millivolts less than the supply voltage and a maximum supply
voltage of 15V, the ICL7667 is well suited for driving power
MOSFETs in high frequency switched-mode power
converters. The ICL7667’s high current outputs minimize
power losses in the power MOSFETs by rapidly charging
and discharging the gate capacitance. The ICL7667’s inputs
are TTL compatible and can be directly driven by common
pulse-width modulation control ICs.
Ordering Information
PART
NUMBER
(Note)
PART
MARKING
TEMP.
RANGE
(°C)
PKG.
PACKAGE DWG. #
ICL7667CBA* 7667 CBA 0 to 70 8 Ld SOIC (N) M8.15
ICL7667CBAZA 7667 CBAZ 0 to 70 8 Ld SOIC (N) M8.15
(Pb-Free)
ICL7667CPA* 7667 CPA 0 to 70 8 Ld PDIP
E8.3
ICL7667CPAZ 7667 CPAZ 0 to 70 8 Ld PDIP*
(Pb-Free)
E8.3
*Add “-T” suffix for tape and reel. Please refer to TB347 for details on
reel specifications.
*Pb-free PDIPs can be used for through hole wave solder processing
only. They are not intended for use in Reflow solder processing
applications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
Features
• Fast Rise and Fall Times
- 30ns with 1000pF Load
• Wide 15V Supply Voltage Range
- V+ = +4.5V to +15V
- V- = -15V to Ground (0V)
• Low Power Consumption
- 4mW with Inputs Low
- 20mW with Inputs High
• TTL/CMOS Input Compatible Power Driver
- R_OUT = 7Ω Typ
• Direct Interface with Common PWM Control ICs
• Pin Equivalent to DS0026/DS0056; TSC426
• Pb-Free Available (RoHS Compliant)
Applications
• Switching Power Supplies
• DC/DC Converters
• Motor Controllers
Pinout
ICL7667
(8 LD PDIP, SOIC)
TOP VIEW
N/C 1
IN A 2
V- 3
IN B 4
8 N/C
7 OUT A
6 V+
5 OUT B
Functional Diagram (Each Driver)
V+
≈ 2mA
OUT
IN
V-
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 1999, 2006, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.