HSP48410 Datasheet, PDF (1/12 Pages) Intersil Corporation – Histogrammer/Accumulating Buffer

Data Sheet
HSP48410
May 1999 File Number 3185.2
Histogrammer/Accumulating Buffer
The Intersil HSP48410 is an 84 lead Histogrammer IC
intended for use in image and signal analysis. The on-board
memory is configured as 1024 x 24 array. This translates to
a pixel resolution of 10 bits and an image size of 4k x 4k with
no possibility of overflow.
In addition to Histogramming, the HSP48410 can generate
and store the Cumulative Distribution Function for use in
Histogram Equalization applications. Other capabilities of
the HSP48410 include: Bin Accumulation, Look Up Table,
24-bit Delay Memory, and Delay and Subtract mode.
A Flash Clear pin is available in all modes of operation and
performs a single cycle reset on all locations of the internal
memory array and all internal data paths.
The HSP48410 includes a fully asynchronous interface
which provides a means for communications with a host,
such as a microprocessor. The interface includes dedicated
Read/Write pins and an address port which are
asynchronous to the system clock. This allows random
access of the Histogram Memory Array for analysis or
conditioning of the stored data.
Ordering Information
PART NUMBER
HSP48410JC-33
HSP48410JC-40
HSP48410GC-33
HSP48410GC-40
TEMP.
RANGE (^oC)
PACKAGE
0 to 70 84 Ld PLCC
0 to 70 84 Ld PLCC
0 to 70 84 Ld PGA
0 to 70 84 Ld PGA
PKG.
NO.
N84.1.15
N84.1.15
G84.A
G84.A
Block Diagram
Features
• 10-Bit Pixel Data
• 4k x 4k Frame Sizes
• Asynchronous Flash Clear Pin
• Single Cycle Memory Clear
• Fully Asynchronous 16 or 24-Bit Host Interface
• Generates and Stores Cumulative Distribution Function
• Look Up Table Mode
• 1024 x 24-Bit Delay Memory
• 24-Bit Three State I/O Bus
• DC to 40MHz Clock Rate
Applications
• Histogramming
• Histogram Equalization
• Image and Signal Analysis
• Image Enhancement
• RGB Video Delay Line
24
24
24
DIN0-23
10
PIN0-9
10
IOADD0-9
ADDRESS
GENERATOR
1
MUX
HISTOGRAM
MEMORY
ARRAY
DATA
IN
DATA 24
OUT
ADDER
DIO
DIO0-23
INTERACE
10
ADDRESS
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999