English
Language : 

HS-80C85RH_02 Datasheet, PDF (1/16 Pages) Intersil Corporation – Radiation Hardened 8-Bit CMOS Microprocessor
c1Po®-nO8t8Sa8Sc-tOIDINBoBaTLuStEEraOHRTSLSSSeUEc-IhL8BhT0eSnEoCeTircP8tIwaT6RlUwROSTHwDuE.poUinPprCtRoeTrrOtsDiCl.UecnCotmTer/tastc
HS-80C85RH
August 2000
File Number 3036.3
Radiation Hardened 8-Bit CMOS
Microprocessor
The HS-80C85RH is an 8-bit CMOS microprocessor
fabricated using the Intersil radiation hardened self-aligned
junction isolated (SAJI) silicon gate technology. Latch-up
free operation is achieved by the use of epitaxial starting
material to eliminate the parasitic SCR effect seen in
conventional bulk CMOS devices.
Features
• Electrically Screened to SMD # 5962-95824
• QML Qualified per MIL-PRF-38535 Requirements
• Radiation Hardened EPI-CMOS
- Parametrics Guaranteed . . . . . . . . . . . 1 x 105RAD(Si)
- Transient Upset . . . . . . . . . . . . . . . . >1 x 108RAD(Si)/s
- Latch-up Free . . . . . . . . . . . . . . . . . >1 x 1012RAD(Si)/s
The HS-80C85RH is a functional logic emulation of the
HMOS 8085 and its instruction set is 100% software
compatible with the HMOS device. The HS80C85RH is
designed for operation with a single 5 volt power supply. Its
high level of integration allows the construction of a radiation
hardened microcomputer system with as few as three ICs
(HS-80C85RH CPU, HS83C55RH ROM I/O, and the
HS-81C55/56RH RAM I/O.
• Low Standby Current . . . . . . . . . . . . . . . . . . . . 500µA Max
• Low Operating Current. . . . . . . . . . 5.0mA/MHz (X1 Input)
• Electrically Equivalent to Sandia SA 3000
• 100% Software Compatible with INTEL 8085
• Operation from DC to 2MHz, Post Radiation
• Single 5V Power Supply
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-95824. A “hot-link” is provided
on our homepage for downloading.
www.intersil.com/spacedefense/space.asp
• On-Chip Clock Generator and System Controller
• Four Vectored Interrupt Inputs
• Completely Static Design
• Self Aligned Junction Isolated (SAJI) Process
• Military Temperature Range. . . . . . . . . . . -55oC to 125oC
Ordering Information
ORDERING NUMBER
INTERNAL
MKT. NUMBER
TEMP. RANGE
(oC)
5962R9582401QQC HS1-80C85RH-8
-55 to 125
5962R9582401QXC HS9-80C85RH-8
-55 to 125
5962R9582401VQC HS1-80C85RH-Q
-55 to 125
5962R9582401VXC
HS9-80C85RH-Q
-55 to 125
HS9-80C85RH/Proto HS9-80C85RH/Proto
-55 to 125
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved