HIP5060 Datasheet, PDF (1/6 Pages) Intersil Corporation – Power Control IC Single Chip PowerSupply

HIP5060
®
Power Control IC Single Chip
PowerSupply
c1o-n8Nt8ao8c-RtOINeoBcTuSoErOmRTLeSmcEIeLhTnnEodircePawdRlwORSwueDp.pUinlpaC_F^toceTr_e^ertsm_a^Cile._t^ecn_u^nott_r^me_e^r/ta_s^{stcAugust 1998}
File Number
• Single Chip Current Mode Control IC
3207.2
The HIP5060 is a complete power control IC, incorporating
both the high power DMOS transistor, CMOS logic and low
level analog circuitry on the same Intelligent Power IC. Both
the standard “Boost” and the “SEPIC” (Single-Ended
Primary Inductance Converter) power supply topologies are
easily implemented with this single control IC.
• 60V, 10A On-Chip DMOS Transistor
• Thermal Protection
• Over-Voltage Protection
• Over-Current Protection
• 1MHz Operation or External Clock
• Synchronization Output
• On-Chip Reference Voltage - 5.1V
Special power transistor current sensing circuitry is
incorporated that minimizes losses due to the monitoring
• Output Rise and Fall Times ~ 3ns
• Designed for 27V to 45V Operation
circuitry. Moreover, over-temperature and over-voltage
detection circuitry is incorporated within the IC to monitor the
chip temperature and the actual power supply output
voltage. These circuits can disable the drive to the power
transistor to protect both the transistor and, most
importantly, the load from over-voltage.
Applications
• Single Chip Power Supplies
• Current Mode PWM Applications
• Distributed Power Supplies
• Multiple Output Converters
As a result of the power DMOS transistor’s current and
voltage capability (10A and 60V), power supplies with output
power capability up to 100 watts are possible.
Ordering Information
PART NUMBER
HIP5060DY
HIP5060DW
TEMPERATURE
RANGE
0^oC to +85^oC
0^oC to +85^oC
PACKAGE
37 Pad Chip
Wafer
Chip
FLTH (37)
VREG (36)
VCMP (35)
PSOK (34)
SHRT (33)
PSEN (32)
TMON (31)
(8) V_DDA
(9) V+
(10) SLCT
(11) CKIO
(12) DGD1
(13) V_DDP
(14) V_DDP
NOTE: Unused pads are for trim and test.
153 mils x 165 mils (3.88mm x 4.19mm)
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved