|
HI7190 Datasheet, PDF (1/24 Pages) Intersil Corporation – 24-Bit, High Precision, Sigma Delta A/D Converter | |||
|
Semiconductor
HI7190
March 1998
24-Bit, High Precision,
Sigma Delta A/D Converter
Features
⢠22-Bit Resolution with No Missing Code
⢠0.0007% Integral Non-Linearity (Typ)
⢠20mV to ±2.5V Full Scale Input Ranges
⢠Internal PGIA with Gains of 1 to 128
⢠Serial Data I/O Interface, SPI Compatible
⢠Differential Analog and Reference Inputs
⢠Internal or System Calibration
⢠-120dB Rejection of 60/50Hz Line Noise
⢠Settling Time of 4 Conversions (Max) for a Step Input
Applications
⢠Process Control and Measurement
⢠Industrial Weight Scales
⢠Part Counting Scales
⢠Laboratory Instrumentation
⢠Seismic Monitoring
⢠Magnetic Field Monitoring
⢠Additional Reference Literature
- TB348 âHI7190/1 Negative Full Scale Error vs
Conversion Frequencyâ
- AN9504 âA Brief Intro to Sigma Delta Conversionâ
- TB329 âHarris Sigma Delta Calibration Techniqueâ
- AN9505 âUsing the HI7190 Evaluation Kitâ
- TB331 âUsing the HI7190 Serial Interfaceâ
- AN9527 âInterfacing HI7190 to a Microcontrollerâ
- AN9532 âUsing HI7190 in a Multiplexed Systemâ
- AN9601 âUsing HI7190 with a Single +5V Supplyâ
Description
The Harris HI7190 is a monolithic instrumentation, sigma delta
A/D converter which operates from ±5V supplies. Both the sig-
nal and reference inputs are fully differential for maximum ï¬exi-
bility and performance. An internal Programmable Gain
Instrumentation Ampliï¬er (PGIA) provides input gains from 1 to
128 eliminating the need for external pre-ampliï¬ers. The on-
demand converter auto-calibrate function is capable of remov-
ing offset and gain errors existing in external and internal cir-
cuitry. The on-board user programmable digital ï¬lter provides
over -120dB of 60/50Hz noise rejection and allows ï¬ne tuning
of resolution and conversion speed over a wide dynamic range.
The HI7190 and HI7191 are functionally the same device so all
discussion will refer to the HI7190 for simplicity.
The HI7190 contains a serial I/O port and is compatible with
most synchronous transfer formats including both the Motor-
ola 6805/11 series SPI and Intel 8051 series SSR protocols.
A sophisticated set of commands gives the user control over
calibration, PGIA gain, device selection, standby mode, and
several other features. The On-chip Calibration Registers
allow the user to read and write calibration data.
Ordering Information
TEMP.
PART NUMBER RANGE (oC)
PACKAGE
HI7190IP
-40 to 85 20 Ld PDIP
HI7190IB
-40 to 85 20 Ld SOIC
HI7190EVAL
Evaluation Kit
PKG.
NO.
E20.3
M20.3
Pinout
HI7190
(PDIP, SOIC)
TOP VIEW
SCLK 1
SDO 2
SDIO 3
CS 4
DRDY 5
DGND 6
AVSS 7
VRLO 8
VRHI 9
VCM 10
20 MODE
19 SYNC
18 RESET
17 OSC1
16 OSC2
15 DVDD
14 AGND
13 AVDD
12 VINHI
11 VINLO
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures.
Copyright © Harris Corporation 1998
1871
File Number 3612.5
|
▷ |