HCTS14MS Datasheet, PDF (1/8 Pages) Intersil Corporation – Radiation Hardened HEX Inverting Schmitt Trigger

HCTS14MS
August 1995
Radiation Hardened
HEX Inverting Schmitt Trigger
Features
Pinouts
• 3 Micron Radiation Hardened SOS CMOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/Bit-Day
(Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
• Cosmic Ray Upset Rate 2 x 10^-9 Errors/Bit Day
• Latch-Up Free Under Any Conditions
• Military Temperature Range: -55^oC to +125^oC
14 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T14
TOP VIEW
A1 1
Y1 2
A2 3
Y2 4
A3 5
Y3 6
14 VCC
13 A6
12 Y6
11 A5
10 Y5
9 A4
• Significant Power Reduction Compared to LSTTL ICs
GND 7
8 Y4
• DC Operating Voltage Range: 4.5V to 5.5V
• LSTTL Input Compatibility
- VIL = 0.8V Max
- VIH = VCC/2 Min
• Input Current Levels Ii ≤ 5µA at VOL, VOH
14 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP3-F14
TOP VIEW
A1
1
14
VCC
Description
Y1
2
13
A6
A2
3
12
Y6
The Intersil HCTS14MS is a Radiation Hardened HEX Inverting
Schmitt trigger. A high on any input forces the output to a Low
Y2
4
11
A5
state.
A3
5
10
Y5
Y3
6
9
A4
The HCTS14MS utilizes advanced CMOS/SOS technology to
achieve high-speed operation. This device is a member of ^GND
7
8
Y4
radiation hardened, high-speed, CMOS/SOS Logic Family.
The HCTS14MS is supplied in a 14 lead Ceramic flatpack
Package (K suffix) or a 14 lead SBDIP Package (D suffix).
TRUTH TABLE
INPUTS
An
OUTPUTS
Yn
Ordering Information
L
H
PART
NUMBER
TEMPERATURE SCREENING
RANGE
LEVEL
PACKAGE
HCTS14DMSR -55^oC to +125^oC Intersil Class 14 Lead SBDIP
S Equivalent
H
L
NOTE: L = Logic Level Low,
H = Logic level High
HCTS14KMSR -55^oC to +125^oC Intersil Class 14 Lead Ceramic
S Equivalent Flatpack
Functional Diagram
HCTS14D/
+25^oC
Sample
14 Lead SBDIP
Sample
An
Yn
HCTS14K/
Sample
+25^oC
Sample
14 Lead Ceramic
Flatpack
HCTS14HMSR
+25^oC
Die
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
390
Spec Number 518607
File Number 3205.1