HCTS139MS Datasheet, PDF (1/9 Pages) Intersil Corporation – Radiation Hardened Dual 2-to-4 Line Decoder/Demultiplexer

HCTS139MS
September 1995
Radiation Hardened Dual
2-to-4 Line Decoder/Demultiplexer
Features
• 3 Micron Radiation Hardened SOS CMOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/
Bit-Day (Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
• Latch-Up Free Under Any Conditions
• Fanout (Over Temperature Range)
- Bus Driver Outputs - 15 LSTTL Loads
• Military Temperature Range: -55^oC to +125^oC
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• LSTTL Input Compatibility
- VIL = 0.8V Max
- VIH = VCC/2 Min
• Input Current Levels Ii ≤ 5µA at VOL, VOH
Pinouts
16 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T16
TOP VIEW
E1 1 1
A0 1 2
A1 1 3
Y0 1 4
Y1 1 5
Y2 2 6
Y3 1 7
GND 8
16 VCC
15 2 E
14 2 A0
13 2 A1
12 2 Y0
11 2 Y1
10 2 Y2
9 2 Y3
16 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP4-F16
TOP VIEW
Description
E1
A0 1
The Intersil HCTS139MS is a Radiation Hardened 2-to-4 line
A1 1
Decoder/Demultiplexer with an active low enable (E). Data
on the select inputs (A0, A1) cause one of the four normally
Y0 1
high outputs to go to a low logic level. The Demultiplexing
Y1 1
function is performed by using the enable input as the data
Y2 1
input.
Y3 1
1
16
2
15
3
14
4
13
5
12
6
11
7
10
VCC
2E
2 A0
2 A1
2 Y0
2 Y1
2 Y2
The HCTS139MS utilizes advanced CMOS/SOS technology
GND
8
9
2 Y3
to achieve high-speed operation. This device is a member of
radiation hardened, high-speed, CMOS/SOS Logic Family
with TTL input compatibility.
The HCTS139MS is supplied in a 16 lead Ceramic flatpack
(K suffix) or a SBDIP Package (D suffix).
Ordering Information
PART NUMBER
HCTS139DMSR
HCTS139KMSR
HCTS139D/Sample
HCTS139K/Sample
HCTS139HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
+25^oC
+25^oC
+25^oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
16 Lead SBDIP
16 Lead Ceramic Flatpack
16 Lead SBDIP
16 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
520
Spec Number 518606
File Number 2231.2