HCS253MS Datasheet, PDF (1/10 Pages) Intersil Corporation – Radiation Hardened Dual 4-Input Multiplexer

HCS253MS
September 1995
Radiation Hardened
Dual 4-Input Multiplexer
Features
Pinouts
• 3 Micron Radiation Hardened SOS CMOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/Bit-
Day (Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Latch-Up Free Under Any Conditions
• Fanout (Over Temperature Range)
- Bus Driver Outputs - 15 LSTTL Loads
• Military Temperature Range: -55^oC to +125^oC
16 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T16, LEAD FINISH C
TOP VIEW
OE 1 1
S1 2
I3 1 3
I2 1 4
I1 1 5
I0 1 6
Y1 7
GND 8
16 VCC
15 2 OE
14 S0
13 2 I3
12 2 I2
11 2 I1
10 2 I0
9 2Y
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• Input Logic Levels
- VIL = 0.3 VCC Max
- VIH = 0.7 VCC Min
• Input Current Levels Ii ≤ 5µA at VOL, VOH
Description
The Intersil HCS253MS is a Radiation Hardened 4-to-1 line
selector multiplexer having three-state outputs. One of four
sources for each section is selected by the common select inputs
S0 and S1. When the output enable (1OE or 2OE) is HIGH, the
output is in the high impedance state.
The HCS253MS utilizes advanced CMOS/SOS technology to
achieve high-speed operation. This device is a member of
radiation hardened, high-speed, CMOS/SOS Logic Family.
The HCS253MS is supplied in a 16 lead Ceramic flatpack
(K suffix) or a SBDIP Package (D suffix).
16 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP4-F16, LEAD FINISH C
TOP VIEW
OE 1
S1
I3 1
I2 1
I1 1
I0 1
Y1
GND
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
2 OE
S0
2 I3
2 I2
2 I1
2 I0
2Y
Ordering Information
PART NUMBER
HCS253DMSR
HCS253KMSR
HCS253D/Sample
HCS253K/Sample
HCS253HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
+25^oC
+25^oC
+25^oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
16 Lead SBDIP
16 Lead Ceramic Flatpack
16 Lead SBDIP
16 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1
Spec Number 518765
File Number 3068.1