HCS195MS Datasheet, PDF (1/9 Pages) Intersil Corporation – Radiation Hardened Inverting 8-Bit Parallel-Input/Serial Output Shift Register

HCS195MS
September 1995
Radiation Hardened Inverting
8-Bit Parallel-Input/Serial Output Shift Register
Features
Pinouts
• 3 Micron Radiation Hardened CMOS SOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/
Bit-Day (Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
• Latch-Up Free Under Any Conditions
• Fanout (Over Temperature Range)
- Standard Outputs - 10 LSTTL Loads
• Military Temperature Range: -55^oC to +125^oC
16 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T16, LEAD FINISH C
TOP VIEW
MR 1
J2
K3
D0 4
D1 5
D2 6
D3 7
GND 8
16 VCC
15 Q0
14 Q1
13 Q2
12 Q3
11 Q3
10 CP
9 PE
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• Input Logic Levels
- VIL = 0.3 VCC Max
- VIH = 0.7 VCC Min
• Input Current Levels Ii ≤ 5µA at VOL, VOH
Description
The Intersil HCS195MS is a Radiation Hardened 8-Bit Paral-
lel-In/Serial-Out Shift Register with complementary serial
outputs and an asynchronous parallel load input.
The HCS195MS utilizes advanced CMOS/SOS technology
to achieve high-speed operation. This device is a member of
radiation hardened, high-speed, CMOS/SOS Logic Family.
16 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP4-F16, LEAD FINISH C
TOP VIEW
MR
J
K
D0
D1
D2
D3
GND
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
Q0
Q1
Q2
Q3
Q3
CP
PE
The HCS195MS is supplied in a 16 lead Ceramic flatpack
(K suffix) or a SBDIP Package (D suffix).
Ordering Information
PART NUMBER
HCS195DMSR
HCS195KMSR
HCS195D/Sample
HCS195K/Sample
HCS195HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
+25^oC
+25^oC
+25^oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
16 Lead SBDIP
16 Lead Ceramic Flatpack
16 Lead SBDIP
16 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
280
Spec Number 518760
File Number 3385.1