HCS151MS Datasheet, PDF (1/9 Pages) Intersil Corporation – Radiation Hardened 8-Input Multiplexer

HCS151MS
September 1995
Radiation Hardened
8-Input Multiplexer
Features
Pinouts
• 3 Micron Radiation Hardened SOS CMOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/
Bit-Day (Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
• Cosmic Ray Upset Immunity 2 x 10^-9 Error/Gate Day
(Typ)
• Latch-Up Free Under Any Conditions
• Military Temperature Range: -55^oC to +125^oC
16 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T16
TOP VIEW
I3 1
I2 2
I1 3
I0 4
Y5
Y6
E7
GND 8
16 VCC
15 I4
14 I5
13 I6
12 I7
11 S0
10 S1
9 S2
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• Input Logic Levels
- VIL = 30% of VCC Max
- VIH = 70% of VCC Min
16 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP4-F16
TOP VIEW
• Input Current Levels Ii ≤ 5µA at VOL, VOH
I3
1
16
VCC
Description
I2
2
15
I4
I1
3
14
I5
The Intersil HCS151MS is a Radiation Hardened 8-Input
Multiplexer having three binary control inputs (S0, S1, S2)
I0
4
13
I6
and an active low enable (E) input. The three binary signals
Y
5
12
I7
select one of eight channels. Outputs are both inverting and
Y
6
11
S0
non-inverting.
E
7
10
S1
The HCS151MS utilizes advanced CMOS/SOS technology
GND
8
9
S2
to achieve high-speed operation. This device is a member of
radiation hardened, high-speed, CMOS/SOS Logic Family.
The HCS151MS is supplied in a 16 lead Ceramic flatpack (K
suffix) or a SBDIP Package (D suffix).
Ordering Information
PART NUMBER
HCS151DMSR
HCS151KMSR
HCS151D/Sample
HCS151K/Sample
HCS151HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
+25^oC
+25^oC
+25^oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
16 Lead SBDIP
16 Lead Ceramic Flatpack
16 Lead SBDIP
16 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
163
Spec Number 518753
File Number 3077.1