HCS14MS Datasheet, PDF (1/8 Pages) Intersil Corporation – Radiation Hardened HEX Inverting Schmitt Trigger

HCS14MS
August 1995
Radiation Hardened
HEX Inverting Schmitt Trigger
Features
Pinouts
• 3 Micron Radiation Hardened SOS CMOS
• Total Dose 200K RAD(Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/Bit-Day
(Typ)
• Dose Rate Survivability: >1 x 10¹² Rads (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
• Latch-Up Free Under Any Conditions
• Military Temperature Range: -55^oC to +125^oC
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• Input Logic Levels
- VIL = 30% of VCC Max
- VIH = 70% of VCC Min
• Input Current Levels Ii ≤ 5µA at VOL, VOH
14 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T14
TOP VIEW
A1 1
Y1 2
A2 3
Y2 4
A3 5
Y3 6
GND 7
14 VCC
13 A6
12 Y6
11 A5
10 Y5
9 A4
8 Y4
14 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP3-F14
TOP VIEW
Description
A1
1
14
VCC
The Intersil HCS14MS is a Radiation Hardened HEX Inverting
Y1
2
13
A6
Schmitt trigger. A high on any input forces the output to a Low
A2
3
12
Y6
state.
Y2
4
11
A5
The HCS14MS utilizes advanced CMOS/SOS technology to
A3
5
10
Y5
achieve high-speed operation. This device is a member of
Y3
6
9
A4
radiation hardened, high-speed, CMOS/SOS Logic Family.
GND
7
8
Y4
The HCS14MS is supplied in a 14 lead Ceramic flatpack Package
(K suffix) or a 14 lead SBDIP Package (D suffix).
TRUTH TABLE
Ordering Information
INPUTS
An
OUTPUTS
Yn
PART
NUMBER
TEMPERATURE SCREENING
RANGE
LEVEL
PACKAGE
HCS14DMSR -55^oC to +125^oC Intersil Class 14 Lead SBDIP
S Equivalent
HCS14KMSR -55^oC to +125^oC Intersil Class 14 Lead Ceramic
S Equivalent Flatpack
HCS14D/
Sample
+25^oC
Sample
14 Lead SBDIP
L
H
H
L
NOTE: L = Logic Level Low,
H = Logic level High
Functional Diagram
HCS14K/
+25^oC
Sample
14 Lead Ceramic
An
Yn
Sample
Flatpack
HCS14HMSR
+25^oC
Die
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1
Spec Number 518752
File Number 3049.1