CD4042BMS Datasheet, PDF (1/8 Pages) Intersil Corporation – CMOS Quad Clocked “D” Latch

CD4042BMS
December 1992
CMOS Quad Clocked “D” Latch
Features
Pinout
• High-Voltage Type (20V Rating)
• Clock Polarity Control
CD4042BMS
TOP VIEW
• Q and Q Outputs
• Common Clock
• Low Power TTL Compatible
Q4 1
Q1 2
Q1 3
16 VDD
15 Q4
14 D4
• Standardized Symmetrical Output Characteristics
• 100% Tested for Quiescent Current at 20V
• Maximum Input Current of 1µA at 18V Over Full Pack-
age Temperature Range; 100nA at 18V and +25^oC
• 5V, 10V and 15V Parametric Ratings
D1 4
CLOCK 5
POLARITY 6
D2 7
VSS 8
13 D3
12 Q3
11 Q3
10 Q2
9 Q2
• Noise Margin (Over Full Package Temperature Range):
- 1V at VDD = 5V
- 2V at VDD = 10V
- 2.5V at VDD = 15V
• Meets All Requirements of JEDEC Tentative Standard
No. 13B, “Standard Specifications for Description of
‘B’ Series CMOS Devices”
NC = NO CONNECTION
Functional Diagram
D1 4
2 Q1
Applications
• Buffer Storage
• Holding Register
• General Digital Logic
Description
CD4042BMS types contain four latch circuits, each strobed by a
common clock. Complementary buffered outputs are available
from each circuit. The impedance of the n- and p- channel output
devices is balanced and all outputs are electrically identical.
D2 ₇
D3 13
D4 ₁₄
CLOCK
5
3 Q1
10 Q2
9 Q2
11 Q3
12 Q3
1 Q4
15 Q4
CL
Information present at the data input is transferred to outputs Q
and Q during the CLOCK level which is programmed by the
POLARITY input. For POLARITY = 0 the transfer occurs during
the 0 CLOCK level and for POLARITY = 1 the transfer occurs
during the 1 CLOCK level. The outputs follow the data input
defined above are present. When a CLOCK transition occurs
(positive for POLARITY = 0 and negative for POLARITY = 1) the
information present at the input during the CLOCK transition is
retained at the outputs until an opposite CLOCK transition
occurs.
POLARITY
6
VDD 16
VSS 8
The CD4042BMS is supplied in these 16 lead outline packages:
Braze Seal DIP H4T
Frit Seal DIP
H1E
Ceramic Flatpack H6W
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
7-868
File Number 3310