FMD28-461 Datasheet, PDF (9/16 Pages) Interpoint Corporation Company – EMI INPUT FILTERS 28 & 270 VOLT INPUT

CASES
CASE V
PIN-SIDE VIEW CASE V*
Flanged case, down leaded)
MOR Series and FME EMI Filters: Screening – Standard, ES, or 883
Also available in U2, W, Y, and Z cases (Figures 56 and 58 - 60)
*Requires case option designator added to model number: MOR2805SV
See Section A5, Ordering Information.
Angled corner
indicates pin one.
1.380 (35.05)
1.250 (31.75)
1.050 (26.67)
0.850 (21.59)
0.650 (16.51)
0.450 (11.43)
0.250 (6.35)
0.120 (3.05)
0.000
Maximum dimensions: 3.005 x 1.505 (76.33 x 38.23 mm)
3.45 (87.6) Reference
(lead center to lead center)
1
12
2
11
3
10
4
9
5
8
6
7
0.128 dia (3.25)
0.040 dia
(1.02)
Materials
Header Cold Rolled Steel/Nickel/Gold
Cover Kovar/Nickel
Pins #52 alloy/Gold
compression glass seal
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.2) for two decimal places
unless otherwise specified
CAUTION
Heat from reflow or wave soldering may damage
the device. Solder pins individually with heat
application not exceeding 300°C for 10 seconds
per pin.
FIGURE 57: CASE V
B8-39