FMD28-461 Datasheet, PDF (5/16 Pages) Interpoint Corporation Company – EMI INPUT FILTERS 28 & 270 VOLT INPUT

EMI INPUT FILTERS ^{FMD/FME EMI FILTER}
0.7 TO 15 AMP
PIN OUT SIDE-LEADED MODELS
FMD28-461SL, FMD270-461SL,
FME28-461, and FME270-461
Pin¹
1, 2, 3
4, 5, 6
7, 8, 9
10, 11, 12
—
Designation
Positive Input
Input Common
Output Common
Positive Output
Case Ground²
Notes
1. All pins must be connected.
2. The baseplate is the only case ground connection and
should directly contact chassis ground.
Angled corner and cover marking indicate pin one for cases U1, U2, and V.
Cover marking indicates pin one for cases W, Y and Z.
TOP VIEW
1
All FME models, FMD28-461SL,
12
2
and FMD270-461SL
11
(Pin side, marked side)
3
10
4 Outline shown is case U2, pin out is the same for all 9
side-leaded cases. Also available: flanged – leads bent
5 down (case V); tabbed – leads bent up (case W), short 8
leads (case Y), and leads bent down (case Z). See
6 _{Section B8, cases U1, U2, V, W, Y, and Z for dimensions.} 7
FIGURE 6: PIN OUT SIDE-LEADED MODELS
FMD28-461
Pin Designation
1
Positive Input
2
Positive Output
3
Output Common
4
Case Ground¹
5
Input Common
PIN OUT DOWN-LEADED MODEL
Squared corner and dot on top
of package indicate pin one.
1
2
BOTTOM VIEW
FMD28-461
Note
1. Although down-leaded packages can be
connected to chassis ground with the case
ground lead, direct contact of the base plate to
chassis improves EMI performance.
5
4
3
See Section B8, case J4, for dimensions.
FIGURE 7: PIN OUT FMD28-461
DSCC NUMBERS
DSCC DRAWING
FME SERIES
(5915)
SIMILAR PART
95004-01HXC
95004-01HTC
95004-01HUC
95004-01HYC
95004-01HZC
95009-01HXC
IN PROCESS
IN PROCESS
IN PROCESS
IN PROCESS
FME28-461/883
FME28-461W/883
FME28-461V/883
FME28-461Y/883
FME28-461Z/883
FME270-461/883
FME270-461W/883
FME270-461V/883
FME270-461Y/883
FME270-461Z/883
For exact specifications for a DSCC product, refer to the
DSCC drawing. Contact your Interpoint representative for
status on the FME DSCC releases. See Section A3,
“SMD/DSCC Lists”, for more information.
MODEL NUMBERING KEY
Base Model
FME 28 - 461 V
Input Voltage
MIL-STD-461 Reference
Case/Lead Option*
Screening
(Standard screening has no designator
in this position.)
/ 883
*Case/Lead Option: See section B8, cases J4, U1, U2, V, W, Y, and Z for
drawings and dimensions, see Section A5 for ordering information.
FME models: Case U2 has no designator in the case/lead option position.
To designate a case option add the case letter to the model number –
FME28-461V.
FMD models: Case J4 (down-leaded) has no designator in the case/lead-
option position. To designate case U1 (side-leaded) for the FMD place
"SL" in the case/lead option position – FMD28-461SL. The 270 volt FMD
is only available in the side-leaded case – FMD270-461SL.
B3-11