FMCE-1528 Datasheet, PDF (9/13 Pages) Interpoint Corporation Company – Attenuation to 70 dB at 500 kHz, typical Transient rating -0.5 to 80 V for 1 second

Crane Aerospace & Electronics Power Solutions
FMCE-1528 EMI Input Filters – Cases
28 Volt Input – 15 Amp
TOP VIEW CASE W*
Tabbed case, up-leaded
*Designator "W" required in Case Option position of model number.
1.750 (44.45)
1.625
(41.28)
2.000
(50.80)
1.375
(34.93)
1.175
(29.85
0.975
(24.77)
0.775
(19.69)
0.575
(14.61)
0.375
(9.53)
0.125
(3.18)
0.000
0.250 (6.35) Typ.
1
2
3
4
5
6
0.250 (6.35)
Typ.
0.140 dia
(3.56)
0.040 dia
(1.02)
12
11
10
9
8
7
Seam Seal
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.3) for two decimal places
unless otherwise specified
CAUTION
Heat from reflow or wave soldering may damage
the device. Solder pins individually with heat
application not exceeding 300°C for 10 seconds per pin.
Materials
Header Cold Rolled Steel/Nickel/Gold
Cover Kovar/Nickel
Pins
#52 alloy/Gold, compresssion glass seal
Seal Hole: 0.120 ±0.002 (3.05 ±0.05)
0.84 ±0.05
(21.3 ±1.3)
Lead Detail
0.400 (10.16) max.
0.220 (5.59)
0.000
0.150 (3.81)
2.80 (71.1) Reference
(lead center to lead center)
Case W, Rev E, 20100413
Please refer to the numerical dimensions for accuracy. All information is believed to
be accurate, but no responsibility is assumed for errors or omissions. Interpoint
reserves the right to make changes in products or specifications without notice.
Copyright © 1999-2010 Interpoint Corp. All rights reserved.
Figure 11: Case W
www.interpoint.com
Page 9 of 13
FMCE-1528 Rev E - 20100615